GetAfterIt
Member
- Messages
- 13
- Points
- 1
Hello-
I've been reading HikVisions website user guides, using the google, using youtube, trying everyone's guides and instructions, but still am having zero luck.
Camera Model - HikVision DS-2DE4A425IW-DE
Firmware - V5.6.11 build 190426
And again, there is no NVR/DVR connected to this camera
We had a HikVision NVR setup with 15 cameras. My goal is rip one of the cameras out of the setup, give it a real IP address and embed that in our website so users can browse to our site, and view and PTZ the camera.
I have the camera off the NVR, it's been re-ip addressed and is available on the internet. I can get to the camera and view the live feed via the web browser and ip address.
Now, i am trying to enable the rtsp feed, but it's not real clear if that is enabled by default? or i have to specify it. I'm trying to test the rtsp in vlc so i know its live, but that doesn't work. VLC keeps prompting for a username and pw. I've tried turning on/off enable secure browsing, i've enabled/disabled Enable Hikvision-CGI, the rtsp authentication is set to digest.
I have a local user-defined with a name/password and just has rights to Remote: Live View and Remote; PTZ Control.
I've been trying all sorts of variations of the following....
rtsp://*User*:GuestPW@*real_IP_address*/Streaming/channels/101
rtsp://*User*:GuestPW@*real_IP_address*:554/Streaming/channels/101
rtsp://162.217.216.215/554/Streaming/channels/101/
I've tried 102, 1 for the channels. any ideas ?
I've been reading HikVisions website user guides, using the google, using youtube, trying everyone's guides and instructions, but still am having zero luck.
Camera Model - HikVision DS-2DE4A425IW-DE
Firmware - V5.6.11 build 190426
And again, there is no NVR/DVR connected to this camera
We had a HikVision NVR setup with 15 cameras. My goal is rip one of the cameras out of the setup, give it a real IP address and embed that in our website so users can browse to our site, and view and PTZ the camera.
I have the camera off the NVR, it's been re-ip addressed and is available on the internet. I can get to the camera and view the live feed via the web browser and ip address.
Now, i am trying to enable the rtsp feed, but it's not real clear if that is enabled by default? or i have to specify it. I'm trying to test the rtsp in vlc so i know its live, but that doesn't work. VLC keeps prompting for a username and pw. I've tried turning on/off enable secure browsing, i've enabled/disabled Enable Hikvision-CGI, the rtsp authentication is set to digest.
I have a local user-defined with a name/password and just has rights to Remote: Live View and Remote; PTZ Control.
I've been trying all sorts of variations of the following....
rtsp://*User*:GuestPW@*real_IP_address*/Streaming/channels/101
rtsp://*User*:GuestPW@*real_IP_address*:554/Streaming/channels/101
rtsp://162.217.216.215/554/Streaming/channels/101/
I've tried 102, 1 for the channels. any ideas ?
Last edited: