I have a lorex nvr n842 with four E893. My nvr can only detect 2 of the 4 cameras. I have confirmed that it isnt the wiring that is the issue. Can someone lead me in the right direction?
I unscrewed the little cap to access the memory slot/rst button. I tried resetting it by holding the rst button for 15s then unplugging the cat6 and whilst holding the rst for another 15s. I dont get any lights or noise on the camera either.
I'm pretty stumped.
I unscrewed the little cap to access the memory slot/rst button. I tried resetting it by holding the rst button for 15s then unplugging the cat6 and whilst holding the rst for another 15s. I dont get any lights or noise on the camera either.
I'm pretty stumped.
