iDS-7208HQHI-M1/S HVR and DS-7216HQHI-K1 HVR connectivity query

[Dmt]

Planning to connect to my iDS-7208HQHI-M1/S HVR a 5MP HD camera with TVI protocol. The above resolution is displayed from my HVR.
However my iDS-7208HQHI-M1/S HVR is directly connected to my DS-7216HQHI-K1 HVR through my Local Area Network and stream cameras from it in full resolution( current is 2MP) playing without issues.

My question is if my DS-7216HQHI-K1 HVR, capable only up until 4MP HD cameras, will display my 5MP camera, which however will be physically connected to my iDS-7208HQHI-M1/S HVR.

Thanks for your time

 

[Kyle]

Hi @Dmt

I can't say for certain as we only really have experience with IP cameras and NVRs, but as the iDS-7208HQHI-M1/S specs state that the maximum HDTVI input is 4MP, this normally means that the camera won't work on it unless the resolution is set to 4MP or less.

 

[Dmt]

Hi Kyle and thanks for your time answering my query.

iDS-7208HQHI-M1/S can play 5MP only in TVI protocol( Other protocols like AHD and CVI stop at 4MP display). Yesterday i physically connect a 5MP camera and perform fluessly.

I connect also physically with BNC the same 5MP camera to my DS-7216HQHI-K1 HVR which is capable until 4MP and indeed the HVR switch the camera automatically in 4MP lite in all HD protocols.

when i will connect my two above HVR through LAN i am wondering if the DS-7216HQHI-K1 can stream from iDS-7208HQHI-M1/S the 5MP camera.
It will certainly stream it at 4MP but i was wondering if i can take the image physically in the iDS-7208HQHI-M1/S at 5MP and by some way can stream it to my DS-7216HQHI-K1 in less analysis