Door Entry Hikvision kis603 error code 10200?

[Bazm]

Hi have just had the door bell system installed ,but when I press the bell it says system failed and on the indoor station when I press main door station it says connection timed out error code 10200 ,anyone know what iam doing wrong . Thanks

 

[Ruben]

Hola si te dieron alguna respuesta porque me pasa lo mismo

Hello if they gave you an answer because the same thing happens to me

 

[Jenan]

Hi have just had the door bell system installed ,but when I press the bell it says system failed and on the indoor station when I press main door station it says connection timed out error code 10200 ,anyone know what iam doing wrong . Thanks

I have the same issue

 

[Tonichello70]

Me too.
Someone solve this issue??

 

[Jake]

After speaking with Hikvision about this, they have given me two solutions on how to potentially fix this issue.

Which solution you use will depend on how you set up and access your door station.

Firstly, please verify that all the network configurations are done correctly i.e. devices are in the local network, the subnet mask is configured correctly, and devices are in the same IP range, as these solutions are done on the assumption that all of the above are correct.


Solution1: VMS-4200

1. The correct door station type/IP has been filled in the indoor station configuration.

2. Check that the indoor station details have successfully registered onto the door station’s device management page



Solution 2: Local GUI


Go to Settings > Advanced Settings > Configuration > Device Management to see whether the correct KV device has been selected as the door station.

 

[Rachita]

Hello,

THANKS , it's working Now

the same IP, (was my problem)

 

[stevensf]

Hello,

THANKS for the solution. I spent my whole Sunday looking and with your solution it works perfectly.

 

[trempa92]

It usually happens when installers/users set DHCP on door station. Once its changes IP it will stop working

 

[astrmn]

Hi,

since updating the indoor station (DS-KH6320EY-WTE2) to V2.2.96 build 241111 I am having the same issue. Intercom is working fine, just the live view of the other cameras around the house is not working anymore.

Port is set to 554, Substream is H264, no IP conflict, ...

Before this, I had no issues.