Hello guys! After reading this forum for hours, I still can't find a solution to my problem.
The technician just installed 2 cameras Hikvision DS-2CD1T47G2H-LIU(F) - ColorVu with Smart Hybrid Light Fixed Bullet Network Camera. They are all powered via POE and connected to the Internet. I don't have a recorder or anything like that. There is a 128 GB Micro SD Card inside of them. I use the Hik Connect app on my iPhone to check the recordings.
I connected to the cameras using the IP address (found by the SADP Tool). I also used the iVMS 4200 for Mac to connect to the cameras. The connection using both methods was fine (the iVMS didn't have some options like human or vehicle tracking), and the cameras are working and recording fine.
BUT, they record everything, or almost everything. I mean it is a bit windy these days here, but again, shouldn't they at least mark "human" on the Hik Connect phone app? The cheapest cameras from Shaomi can do that. The sensitivity is set to 20, and I can't go less (unless I hit 0).
Sending screenshots from the browser. Let's ignore the fact that I can't see the image from the camera, that's why I couldn't find a way to install that plugin on my mac.
Please help. I just want to be able to easily see if a human was walking near and I don't want to check each minute of the entire night to do so. On other cameras, there is a different color for when a human is detected. I hope you can help me. Thank you guys. Appreciate every clue or a tip.
The technician just installed 2 cameras Hikvision DS-2CD1T47G2H-LIU(F) - ColorVu with Smart Hybrid Light Fixed Bullet Network Camera. They are all powered via POE and connected to the Internet. I don't have a recorder or anything like that. There is a 128 GB Micro SD Card inside of them. I use the Hik Connect app on my iPhone to check the recordings.
I connected to the cameras using the IP address (found by the SADP Tool). I also used the iVMS 4200 for Mac to connect to the cameras. The connection using both methods was fine (the iVMS didn't have some options like human or vehicle tracking), and the cameras are working and recording fine.
BUT, they record everything, or almost everything. I mean it is a bit windy these days here, but again, shouldn't they at least mark "human" on the Hik Connect phone app? The cheapest cameras from Shaomi can do that. The sensitivity is set to 20, and I can't go less (unless I hit 0).
Sending screenshots from the browser. Let's ignore the fact that I can't see the image from the camera, that's why I couldn't find a way to install that plugin on my mac.
Please help. I just want to be able to easily see if a human was walking near and I don't want to check each minute of the entire night to do so. On other cameras, there is a different color for when a human is detected. I hope you can help me. Thank you guys. Appreciate every clue or a tip.