Hi there, I have a few questions if anyone has come across this I would really appreciate it.
I've been struggling to understand some concepts and starting to wonder if im thick or its just not possible.
So starting with the basics.
NVR - DS-7732NI-14/16
Licence Plate Camera - DS-2CD7A26G0
Gate Door Station - DS-KV8102
Indoor Station - DS-KH6310
IVMS4200- Latest Version running on a PC I leave running all the time while I work, NVR is tucked away.
The functionality I would love to achieve
1. When Line Detection is is set off, for it to open the gate, when people leave the property
2. When a licence plate is whitelist detected, open the gate, when authorised people enter the property
3. When a licence plate is detected, whitelist or blacklist, show up in IVMS Event Center
4. When my PC reboots, all IVMS events in event center are wiped clean, I can search but would be nice to keep them all.
The things I am struggling with.
1. Opening the gate, this can be done with the indoor station easily and from the IVMS connected directly to the Gate Door station there is an unlock which works manually
When opening the gate, I can see these events show up, ive marked them as red so they stick out when im mucking around
- What im not sure of here is how to tie these events together and where to tie them.
The Indoor Door station has the ability to send unlock to the gate, The IVMS has the ability to send the unlock to the gate.
Is it possible to tie the line detection going off to unlock the gate?
2. and 3. Blacklists and Whitelists
I can connect directly to the Licence Plate camera, download and upload XLS and add vehicle plates, when connecting directly to the camera under Road Traffic/Real Time, this shows its detecting correctly. There is no such setting under the NVR, it seems to be a direct camera thing.
Under the IVMS, these blacklist/whitelist events are not listed. Im not sure why they do not appear in there. Under linkage Method, Notify Surveillance Center is ticked
Im guessing if I could work that out, and the first question, then I could tie a whitelist to the same event.
4. This is a nice to have as it makes it easier to search this if needed.
Thanks for any info that might assist, I have read the documentation a million times, watched a ton of youtube and pretty much know every setting on the individual camera, NVR and IVMS blindfolded![Smile :) :)](/forum/styles/default/xenforo/smilies/smile.png)
I must be missing something
Thanks again
I've been struggling to understand some concepts and starting to wonder if im thick or its just not possible.
So starting with the basics.
NVR - DS-7732NI-14/16
Licence Plate Camera - DS-2CD7A26G0
Gate Door Station - DS-KV8102
Indoor Station - DS-KH6310
IVMS4200- Latest Version running on a PC I leave running all the time while I work, NVR is tucked away.
The functionality I would love to achieve
1. When Line Detection is is set off, for it to open the gate, when people leave the property
2. When a licence plate is whitelist detected, open the gate, when authorised people enter the property
3. When a licence plate is detected, whitelist or blacklist, show up in IVMS Event Center
4. When my PC reboots, all IVMS events in event center are wiped clean, I can search but would be nice to keep them all.
The things I am struggling with.
1. Opening the gate, this can be done with the indoor station easily and from the IVMS connected directly to the Gate Door station there is an unlock which works manually
When opening the gate, I can see these events show up, ive marked them as red so they stick out when im mucking around
- What im not sure of here is how to tie these events together and where to tie them.
The Indoor Door station has the ability to send unlock to the gate, The IVMS has the ability to send the unlock to the gate.
Is it possible to tie the line detection going off to unlock the gate?
2. and 3. Blacklists and Whitelists
I can connect directly to the Licence Plate camera, download and upload XLS and add vehicle plates, when connecting directly to the camera under Road Traffic/Real Time, this shows its detecting correctly. There is no such setting under the NVR, it seems to be a direct camera thing.
Under the IVMS, these blacklist/whitelist events are not listed. Im not sure why they do not appear in there. Under linkage Method, Notify Surveillance Center is ticked
Im guessing if I could work that out, and the first question, then I could tie a whitelist to the same event.
4. This is a nice to have as it makes it easier to search this if needed.
Thanks for any info that might assist, I have read the documentation a million times, watched a ton of youtube and pretty much know every setting on the individual camera, NVR and IVMS blindfolded
![Smile :) :)](/forum/styles/default/xenforo/smilies/smile.png)
I must be missing something
Thanks again