hikvision

Hi Im after relocating my ptz to a new viewing point , I checked the cables and camera where good and working before mounting on a lamppost and they where working fine and could be viewed on nvr and through the app . Now that I have mounted everything the ptz is turning but no picture on nvr...

Hi there, im just wondering if I can put the question out to the forum - I’m pretty sure of where I’m going to position my cameras however before I go ahead with the purchase just wanted to cross check. Overall I think I’m going with ColorVu G2 4mp turrets but open to feedback based on...

Hikvision has today officially released the RTMP patch firmware that you will have seen mentioned in several YouTube Videos and in multiple posts on this forum...

Hey folks so i got this hikvision poe switch DS-3E0105P-E/M(B) and was wondering, can i utilize this for non poe devices just to add them to the network. eventually the older cameras will be replaced with poe cameras but for now i just want to utilized it on the network via cable. the cameras...

Hi, I have a Hikvision DS-2DE4225IW-DE camera. It does boot up, and I can access its IP address. The issue I am facing is the image only clear when I am about 20-30 cm from the camera, and it looks like is in a maximum zoom mode. I am not able to change that, don't know why. Did hard reset few...

Hikvison's AcuSense NVR range has now been made available in the UK. If you have an IP CCTV system set up already, but your cameras do not have AcuSense technology built into them already, then these NVRs are an affordable way to add these analytics to your system without replacing all of your...

Hi I hope someone come help. I have a brand new NVR iDS-7700. I have tried with an AcuSense DS-2CD2386G2-IU with both a 4mm and 2.8mm lense. I am finding the facial recognition smart event is only firing when someone stands within 2 metres of the camera. You have to get up really close. Am I...

Hi, - 8 Hikvision cameras - NVR is DS-7616NI-K2 I want to be able to view my cameras (live playback, recorded playback) through my TV in the lounge. What is the best way to do this? 1. HDMI I can connect the HDMI cable from NVR to the TV but the NVR is very far from the TV and so connecting...

Hi there in case of upgrading my surveillance system to get rid of all my 8 NVR TO one equipment. which equipment should i use. is the hikvision blazer pro all in one is the best choice alone or i need to use hikvision NVR with 128 channel along the the blazer pro thanks in advance

Hello, I am trying to setup Email notifications in my DS-7608NXI-I2 / 4S NVR and what ever I try does not seem to work on a known working email server. I also investigated that the firmware version might be the issue. My current firmware is V4.1.18 build 200120. My main question is, is there a...

Hi, all. Looking to get cameras purchased for home and I'm struggling with model numbers and which to pick. I know that I want to go Hikvision and I'm already set on a DS-77 I-series NVR: I have Cisco PoE switches throughout the house so I plan to use the Dual LAN model (no PoE) as I will...

Hi So I recently purchased a video intercom set from hikvision that includes door station DS-KV8113-WME1 and monitor DS-KH6320-WTE1 . Everything works fine but I don't have Day/Night Mode settings in ivms4200 or through website configuration but I know that model has that option cos in videos...

Hello everyone. Its been 24 hours of trying to do this myself and im at my wits end. I have a 32 camera setup at my business. Playback was giving me issues so my intelligent mind thought I would first delete the camera and readd it. That should fix it. It didn't. Then I factory reset it...

First of all, good morning, I would like to ask your help regarding a recorder that I installed recently. Here is the model of the recorder: DVR-104G-F1 What is happening is the following: This recorder has a camera beyond the four he has. This last camera does not work in the Hik-Connect...

Hi, Since a couple of days, I am reading all over the net regarding the hikvision systems (I admit that I am really confused, alot of contradictor information) trying to understand which parts to buy: So my question is the following : to get the benefit of the acusense technologies, which...

Hi all I'm needing to install some cameras in a parking area around a building, where we've had regular intruders try to (and sometimes succeed) in breaking into the garages on the ground floor. Since both Hikvision and Vivotek now have models of camera with built-in analytics to detect human...

Hi, I have a Hikvision DS-7608NI-I2/8P NVR with 4x Hikvision DS-2CD2386G2-ISU 8MP AcuSense Fixed IR Turret Network Cameras. The 4 cameras connect to a POE switch, which connects to my router. The NVR also connects directly to my router. I have a few questions in addition to the motion...

Hi All, I'm after information. I know not CCTV directly but I'm hoping someone knowledgeable can direct my research. We have a HikVision CCTV system. We are thinking of installing electric gates and I would like to stay with the same manufacture instead of another tech stack, and app. Can...

Hi I’m a novice networker, but set up a new hikvision cctv system. My 8 cameras are all wired in via switches, not directly into the nvr. I used a monitor during setting up the nvr but now have the monitor disconnected. From my iPhone and using hik-connect app, I can view the nvr and the...

To Adjust the smart event pre-record and post-record you need to follow these steps: 1) Log in to the NVR/Camera 2) Go to Configuration > Storage > Schedule Setting > Record Schedule 3) Click the 'Advanced' button at the top right of the record schedule 4) Select the duration you want from...