Hikvision ANPR and Fps for /P and not /P version DS-2CD4A26FWD

[bisinella]

I have bought 2 cameras for license plate recognition and i have notice differences with Fps:

in model DS-2CD4A26FWD-IZHS/P i can set 50FPS
but in model DS-2CD4A26FWD-IZHS the FPS is limited to 25 (Firmware version: V5.4.5 build 170302 (latest as on Hikvision newsletter of november)

I can't find information about this difference.
I know that with /P the model is for ANPR, but also without /P the ANPR is available and working.
If in the model wihtout /P i set "Smart Event" instead "Vehicle Detection" the 50 FPS become available.



Someone have solved this issue?

Thanks!

 

[Phil]

This is the first mention I have seen of this difference.
Plenty of people using the -IZHS as an ANPR camera with the correct firmware loaded.

 

[bisinella]

Yes, the Anpr works, but the Fps is limited.
I will contact Hikvision support to know if they confirm this difference.
No one in the web has talked about this.

 

[bisinella]

Hikvision say:

"Sorry to tell you that the device can’t support 50fps in vehicle detection."

So, i have found the difference for the /P version.

 

[Phil]

Thanks for sharing