Andrew Beck
New Member
- Messages
- 3
- Points
- 1
When testing my newly purchased IP8332 camera I noticed that it occasionally goes blurred and this causes a motion trigger event.
I've uploaded the motion triggered video of this to http://www.flickr.com/photos/11228019@N05/7590896338/ and at about 3 seconds you will see it blur
If you look at the live view after the event then it is still blurred, but the camera un blurred itself after about 3 minutes in this case causing another motion event.
This seems similar to lombana posting in the "IP8332 Recording Settings" thread
The camera has been upgraded to the latest firmware0110a
I've uploaded the motion triggered video of this to http://www.flickr.com/photos/11228019@N05/7590896338/ and at about 3 seconds you will see it blur
If you look at the live view after the event then it is still blurred, but the camera un blurred itself after about 3 minutes in this case causing another motion event.
This seems similar to lombana posting in the "IP8332 Recording Settings" thread
The camera has been upgraded to the latest firmware0110a