Search results

Are all the camera firmware versions the same? For the camera that is not working is ONVIF enabled? Should be found under network settings. Another option to connect is RTSP using port 554 (check this), check the camera has RTSP enabled. David

Your answers are too vague.

If the camera is connected to the same LAN as the NVR you should be able to add the camera to the NVR using the ONVIF or RTSP (usually port 554) protocols. You will need to know the IP address of the camera. David

what are the camera and nvr make and model numbers? David

Speak to Home 4G/5G installations, Networking, Building to Building WiFi, Fibre - solwise.co.uk | Solwise Ltd they’ll help. Back in 2015 I used the GEM420 on 6 oil rigs as primary / backup comms. Very reliable gui was a bit fiddly. I still use one at home as a failover. David

Mike, Does the 4G service provider offer SIM cards with a public IP address? David

this sort of thing can be mentally exhausting, stay focussed on your elderly dog. Don't forget my earlier comments about LED laser lights. If your cameras / DVR are setup to record on Motion / intrusion detection only, the light may be too brief to trigger a recording. The camera pointing...

what is the model number of your Rollei camera? I want to check the specifications to see what it can do. How would you rate your computer skills, are you happy to install software? Do you use your computer to view the CCTV video or via a TV / monitor attached to the DVR? David

What model camera did you take the picture with? The cctv DVR / camera model numbers may be on the installers invoice. David

@CountryGirl, Not sure but it may be related to the frequency of the laser light being outside the range of the cameras IR cut filter. When you see the light coming through your windows is it visible (may be very faint) on the cctv camera? What model camera do you have? it could be possible to...

Thanks Kyle, I'll take a closer look. I've always found the fire / security / alarm sector to be a semi closed shop. Webeye | Take the hassle out of managing alarms. also offer the videofied and vigileyez systems. David

Looks similar Videofied OMV210 rebranded to Resideo (Honeywell??) OMV210. Videofied | Resideo

@Dan @Kyle do you know of any off grid 4g LTE PIR cameras? Power management would be a bonus. David

Rob, Email sent and connected via LinkedIn. David

I've been retired for a few years now, it would depend on how much help. David

Rob, 4G should be possible, don't use a one size fits all approach. Routers will need a SIM card with public IP address and VPN connectivity for remote access. Each site will be receiving different 4G signal quality levels, I'd try to use external omni directional 4G antennas. if signal...

Hi Rob, I can offer some advice on what to consider.... Any remote off grid solution needs a well designed power supply and battery system. Followed by robust connectivity to the internet. For the battery charge controller Use a combination of wind and solar charging also have a direct...

Hi Henk, New camera wifi interfaces are usually disabled and enabled by the bluetooth or ethernet interface. Some new camera wifi interfaces are enabled and act as an access point and maybe setup as a client to connect to your router wifi network. Do you have the camera specifications and setup...

Hi Henk, I am not familiar with your smartphone but cannot see the Bluetooth (BT) on icon. Is BT enabled? Try downloading the app onto a pc and setup from that. Is there a factory reset button on the camera? David

Henk, That link is not very helpful, I selected English but the description is in Thai. what does the v360 app show? The manual may also show setup using an ethernet cable connected to your router.