Search results

Thanks, I will give this a go.

@JB1970 thanks for your suggestions, I temp opened ports and now confirmed all are set to UDP but no change to the issue. Most of the time the stream auto-changes quickly, but sometimes it takes 10 to 60 seconds. And it's this 10 to 60 second delay which then puts the streams out-of-sync with...

I have never had any issues like this before now. I tried that, 2 NVRs were already set to UDP, one I changed from TCP to UDP. But 2 others are on remote sites and HTTP is blocked, so I guess I can't check/change those 2 NVR settings without opening up their HTTP ports temporarily?

I recently installed iVMS 3.9.0.5_E (on Windows 11). Due to problems I uninstalled previous version, rebooted and installed this new version so in theory its a fresh install. I am having 2 main problems and wondered if anyone else experiencing issues: 1) When I start main view all the feeds...

I upgraded my iVMS-4200 from V3.3.1.8_E to V3.9.0.5_E (on Windows 11) Is it normal that you have to run as (Windows administrator? Every time you run the software it says you must allow the software to make changes to your system - i.e. a Windows privileged admin login is required. If so this...

A few questions: 1) What country/region are you in as that can affect what firmware version/download you need and where to download from. 2) How are you attempting to upgrade your camera firmware? Via the camera web interface or via SADP tool or some other method? I have many HikVision cameras...

If you mean how many days are stored on your personal NVR then the way I do it is in IVMS-4200 go to "Remote Playback" and when you select a day the calendar view shows an mark on days have recordings so you can count back to see how many days of recordings you have.

According to some of my previous notes I got this working in the past using this RTSP URL: /Streaming/Channels/01 I can't remember which of my NVRs this was on and I can't try it myself right now but give that a go.

For high bandwidth data applications you should always wire both ends of cables to the ANSI standard TIA-568B so just do a search engine image search for "TIA-568B" and you will see the required pin/colour order. For technical reasons (I admit I don't fully understand) it is important to keep...

@mannis79 A) Yes, that's right. If you don't want the cameras split I think your only choice would be to connect ALL cameras to one or more PoE switches. B) Yes, you are correct, although some camera functions may rely on internet access, e.g. Network Time Protocol (NTP) to do time...

For example, if you changed your http port from 80 to 50000 and your ip address was 192.168.0.1 you would need to use an address and specify port number in this format: http://192.168.0.1:50000

I think ports go from 1 to 65535 Some are common to certain things, others are just used by whoever for whatever. As long as it does not clash with other network traffic on your network you could probably use whatever port. I usually use something quite high in the registered port range. See...

HikVision don't allow you to disable the admin user! I have said here before here it's a terrible security choice by them. And to top it off the password length limit is only 16 characters! The best you can do is set all user passwords to the most complicated/obscure password possible within...

I suspect the NVR will log the alert for every attempted login with an invalid password. If you yourself type the wrong password I think it will log the alert. You can try it and see. But what is your use-case? Do you really need these ports open to the world for your own use? Do you access...

An "Illegal Login" error is an "Attempted" login. So someone is trying a username (almost certainly "admin") and various passwords. If you have a strong password you should be o.k. assuming there are no HikVision vulnerabilities now or in future... But to cut down on the number of hacker...

On my version of iVMS-4200 (3.3.1.8) if you save your live view using the disk icon near the bottom-left. Then on the bottom-right click the cog/settings icon and there should be an option there "Resume Latest Live View after Restart". For me iVMS mostly resumes to the last live view, but being...

Could you not connect the home powerline adapter to your router? Then it's on your home network and the garage switch is just an extension of that.

Only suggestions I have left are: 1) The classic "turn it off and on again" (the Asus router) and also forget the network on your phone and re-connect. 2) Some routers now have the ability to define a guest WiFi network with is separate from the main WiFi network - just checking you are not...

On your Asus WiFi Router config go to Advanced Settings -> Wireless -> Professional and check if "Set AP isolated" is enabled (YES). If it's enabled then wireless devices are prevented from communicating with each other and that maybe would cause the problem you are having. If it's not that...

I don't know anything about the Hik Connect method as I have never used it but you should be able to add a device "Manual Adding" as "IP/Domain" then just enter your NVR local IP address, port (usually 8000 unless you configured it different), and a username/password. That should then work when...