Search results

With FL 4mm you'll probably slightly overlook your neighbours drives, make sure they're ok with that. I really like the ColorVu cameras, especially if ambient street lighting is nearby. Use-IP also have a 14 day buy and try policy. David

Morning @chits712, We’ll need to do some detective work…. Can you post pictures of your DVR front, back and underneath? Do you know the DVR administrator user name and password, if not can you find out? What is your router make and model number? Is the DVR connected to your network by wifi...

I remember using RG59 and 75 ohm BNC plugs on Axis analog cameras.

if the DVR has DHCP enabled your router should show the IP address on the router device list. You may need the DVR MAC address to help identify the right IP address. The DVR MAC address could be on the serial number sticker.

@johnfitzy I downloaded v1.1 and copied it into the same folder as v1.0 (renamed old). Ran ok and loaded data from the ini file. I see you added the app version number as well. Does the app automatically adjust for UTC/BST changes? Looks like it does. David

It may help you to download the SADP tool here. It will show the cameras / dvr connected to your network along with model numbers, firmware etc. David

Does this help? I'm not sure its the right manual. David

Does your app/software ‘see’ the DVR on the network? David

@zdenek Could your remote access password be compromised? From your image are those the total internet usage figures? Can you break it down to the inbound and outbound data figures? David

@Holmatt55, following on from my earlier post... Download the hikvision (Canada) sadp tool here and install it. When you run sadp your computer must be on the same network as your cameras. Post a screenshot of the result, make sure the serial number column is minimised. David

Hello Matt, Could you post some model numbers so we know what you are talking about? When you upgraded your internet did you get a new router? It is possible that your network IP addresses have changed. David

@gserbele there’s a mix up of subnets, let me draw a diagram so I can understand it better. Where are you?

Just seen this, I’ll have to read it a few times. David

https://www.spycameracctv.com/

I get similar notifications, on checking I’m up to date. Probably a bug.

I have the same NVR and firmware release of 4.61.025. Leave it as it is, you have the latest firmware that I can tell. David

Can you ping any of the ubiquiti bridges? Could you post a network diagram to understand what is where include model numbers.

I am not familiar with Hikvision access control, what model numbers are the indoor and outdoor units?

I can't see why not, how will the wifi network work to give IP addresses to the clients? Model numbers would help and a network sketch. Part of my IPCCTV setup will work router free even after a mains fail and power up. Those devices use static IP addresses. David

@BHall Would Draytek routers help Vigor 2763 Series