Latest activity
-
JB1970 replied to the thread Hikvision Min. Illumination.AGC by default is set to 100% gain. In Auto mode the camera will set the gain at what it needs up to 100. The only way you can control... -
KMinimum lux figures can give an indication of better or poorer low light performance between models but I really wouldn't read too much...
-
Kkruja replied to the thread Hikvision Min. Illumination.Yes. I think that's OK. The camera at 0.002 lux, turns on AGC and keeps the image in color. That's how it works with the help of AGC. My...
-
JB1970 replied to the thread Hikvision Min. Illumination.Minimum lux figures can give an indication of better or poorer low light performance between models but I really wouldn't read too much...
-
KCamera 1 has better colour, low light performance (0.0005 being lower than 0.002) What is the model number of Camera 1? If it is...
-
Kkruja replied to the thread Hikvision Min. Illumination.And what happens with the range between 0.002 and 0.0002? In the data it says that the black/white image starts from 0.0002.Camera...
-
EEric Man Do Dar replied to the thread Help needed setting camera up.Sorry it say its an I camera not an IP camera it should just be a case of plugging the wire in at bough ends very simple really
-
JB1970 replied to the thread Hikvision Min. Illumination.Camera 1 has better colour, low light performance (0.0005 being lower than 0.002) What is the model number of Camera 1? If it is...
-
KIf we read the technical specifications given by Hikvision, I think that camera number two is better. Am I wrong or is my opinion...
-
Dan replied to the thread Help needed setting camera up.Thanks @Eric Man Do Dar What you have is an analog COAX camera and not an IP camera. We have very little experience with analog... -
EEric Man Do Dar replied to the thread Help needed setting camera up.direct via a coaxial cable I do not know what a network port is But it dose have a set of about 7 channels / input signals on the back
-
Dan replied to the thread Help needed setting camera up.Okay, How are you connecting the IP camera to your local network? Is it plugged directly into a recorder or connected to a separate...
-
EEric Man Do Dar replied to the thread Help needed setting camera up.I cant find it!
-
JHello, I bought a new NVR 7616K1 (D) and I want to add a DVR to it, also Hikvision. I find the cameras, I add them 1 by 1 as I have seen...
-
JJohnCCTV replied to the thread Hik-Connect HDD exception?.mine had 1 bad sector also. It has now gone. I replaced with purple WD23PUZ Western Digital.
