ip camera

Hello! I could use your expertise to help me change the language on this NVR from Chinese to English. Alternatively, if updating the firmware might resolve it, guidance on that would be greatly appreciated. Thank you for your help!

I am looking for a bit of help with adding another camera to my existing system. I have an Ony-x Falcon FALC-NVR-8BB NVR and 3 bullet and 2 turret 5Mp Qvis cameras. They are all still working fine, however I need to add another camera and I can't get an ethernet cable or coax to its proposed...

Hello all, We have a HiView HW-3310M-H3 NVR with 8 HiView HW-33B30-H3 cameras connected. Now one is broken and as we now have ethernet where the camera is installed we bought a HiView HP-554B40PE-M ethernet camera to replace it. The camera has its own GUI so we logged in, gave it a static IP and...

My NVR Model Number - DS-7608NXI-K1 Cameras Model Number - In Attach PNG Any Suggestion

I have a Techvision IP camera model PBE4L3WZ - S/I/A. There doesn't seem to be much information regarding Techvision cameras but I was hoping I could do a reset by pressing the button on the camera as I plug it in and hold it for about 30 seconds, but it never resets. I also tried 45 seconds. I...

I am looking to install two ip cameras on the front gate. Camera 1: The way to my home main door is through the alleyway and distance from black gate to alleyway is 10ft in length marked in blue arrow and is 6ft wide(yellow arrow) so I was thinking of installing camera 1 here to capture all...

I have inherited a no-name NVR system. It looks very similar to the Dahua NVR-E16L2P8. The only difference I can see is on my NVR the first 8 ports on the back have a shaded green background which I think has to do with the different power/watts allowed for the separated sections of PoE ports...

Pelco Camera Ranges The following article is a guide to Pelco's different camera ranges, what each series has to offer and their main features. Pelco offers a wide selection of different camera types, with each series being a part of Pelco's PTZ, Fixed IP, Speciality, or Panoramic camera...

Hello All, We want to install 8 cameras with human/vehicle detection and line crossing. If possible , for cost effectiveness, we want to use 5 cameras with AcuSense and other 3 Normal IP Cameras with AcuSense enabled in NVR. If that isn't not possible, we want to go with all 8 AcuSense cameras...

In this second part of our multi-part series on setting up your first home security system, we’ll be building on the basics we covered in part 1 and go more in-depth on the different IP camera features we should be considering when purchasing our system, and the options that are available. We’ll...

I Have ANRAN IP CAMERA Model CA43 that has capable of WiFi connectivity, but my concern is how can i connect it to the NVR or DVR, because the NVR has ONVIF support but this camera has none, so how can i connect this to nvr when it has no feature onvif on it? ... can i use the rtsp or the...

Many people are familiar with the term ‘security camera’ but are not quite sure what an ‘IP camera’ is and what ‘IP’ actually means. IP stands for Internet Protocol and is the standard that sends data across a network. Before the introduction of IP cameras, security cameras were all analogue...

The school director asked me to look for a poe camera that perform good at night and price is no more than 120$. We already have an expensive Hikvision camera, but it does not fit into the budget. I'm really satisfied with the brand. I found 3 option: -Hikvision DS-2CD1023G0E-I (2.8mm)...

Hello everyone, I have xmeye ptz camera 270° , I successfully set up the ptz and perset , so I added them to the tour, but when I restart the camera, the tour does not work automatically, what I want exactly is how to turn on the tour automatically from taking off the camera , I need help please .

HI Which software to use if you have three different manufacturers of ip cameras at home to stream all camera in one app (IOS and Android)? Does somebody known ?

Hi, I can't access to my camers IP HIk Vision (DS-2CD1001-I20170313) : The message is : the user or password incorrect I Would like to change it but I can't access to my cameras. I use Mac iOS, iVMS-4220 and SADP. I send a message to info@use-ip.co.uk but I have not got any callback...

Hi I need help to find an appropriate IP camera/s that has a good FOV, zoom capabilities and is suitable for indoor filming of live music events, so with good low light capabilities, light brightness variations, autofocus etc. I need a mid-range, minimum full HD, 4k would also be great. Cant...

Hello. My father built a camera surveillance system at home. He is no longer with us, and I am trying to understand how to use it. I have almost zero understanding about how it all works, but I have to use the system. Please guide me through that process. I see that he has SMC on his computer...

Formerly Samsung Techwin, Hanwha Techwin products have been going through a transformation period over the last 5 years to move away from the Samsung name completely to its new (or not really that new) name. The phasing out of products can take a while and so the product pages for the products...

Afternoon All, Sorry in advance if this has been asked before but i couldn’t find it. I currently have a 4 channel BNC ANPR system and have been given an IP camera and I was wondering if I can connect it to one of the BNC sockets and use it via one of the channels? Thanks in advance, Paul