hikvision

Hello - I've been working on this for days and have come to a dead-end, so I would appreciate any help. I have a iDS-7716NXI-I4/16P/8S unit running a range of fairly standard cameras. However, I've just added a TandemVu PTZ DS-2SE4C425MWG-E/26 PTZ. I can get everything working using the camera's...

I recently upgraded my NVR from the DS-7616NI-M2/16P to the IDS-7716NXI-M4/X and I was wondering how I can set up the ANPR and Facial Recognition features that the NVR has built in. I currently have x3 Hybrid Colorvu Turrets (DS-2CD2347G2H-LIU) and x1 Dome PTZ (DS-2DE4A225IWG-E) connected via...

NVR: NVR-108MH-C / 8P NVR: Firmware V4.30.216 build 231229 Cameras: Im not exactly sure how to check the model numbers, as its only the NVR that shows up on SADP or IVMS search with the cameras under it. Hello, I've recently set up a new PC and reinstalled IVMS as part of the process. While...

I already did Hikvision 'iDS-7208HQHI-M1' reset password but when i do login it is showing wrong password . What is the problem please ?

This is a bit of a long story. I decided to revive my Hikvision system after many years. The system consists of: 1. DS-7608NI-I2/8P NVR - This was powered off and stored properly. It has a 4T WD CCTV drive in it. (I think I bought this from use-IP) 2. 1xDS-2CD2142FWD-IS - external (I don't...

Hello! Hoping someone can help me? I recently changed ISPs (BT to Sky). My IP camera uses a TP-Link (one end is plugged into my router). All of the lights are green and I've repaired them. I checked the IP address and noticed it was still the BT range (192.168.1.X) whereas my DVR automatically...

Introduction Hikvision's ANPR cameras offer an economical solution for automatic number plate recognition and vehicle monitoring. However, selecting one from their wide array of models can be daunting. This guide explores the main things to consider when picking an ANPR camera and compares in...

Hi, Something very basic which I used to do a few years ago…. Making one of the windows show full screen for X amount of seconds when motion was detected. I believe it used to be called ‘Full screen monitoring’!? My father in law has NVR DS-7616NXI-I2/16P/S. I recall this used to be a very...

Hi, I have a 16-channel hikvision dvr with 16 analogue cameras connected. Recently, I have added 3 ip cameras to my dvr, and now it has 19 channels. The problem is that the hikconnect app on my phone is showing only 16 channels. Is there any way I can add those 3 ip cameras under the same dvr on...

It is possible to filter the motion detection events by human and vehicle on Motion Detection 1.0 NVR if camera has Motion Detection 2.0 (Acusense)? I am refering to Normal Motion Detection, not Permietral or Line Crossing!

I have a DS-7604NXI-K1/4P(D) with V4.83.011build241205_ReleaseNotes and am looking for 4 cameras to pair with for home usage. 3 cameras will be for outdoor perimeters and 1 camera will be in the garage. What I am aiming for is the setup to be able to at least do some human and vehicle...

The capacity of microSD is something that is continually increasing at an astonishing rate, with cards as large as 2TB starting to become available. As almost all new Hikvision IP cameras have memory card slots for onboard storage, and you would have traditionally needed an NVR with hard drives...

Hi, I have changed my NVR from DS-7608NI-I2/8P to DS-7616NI-M2/16P because I needed more cameras. On the older I2 (with NVR 4.0) I used to view the live view with VCA info turned on (i.e. seeing the green/red boxes where any movements were happening). And that worked fine for the 6 cameras I...

I currently have DS-7204hgh-sh dvr with 2mp cameras and would like to upgrade the dvr without changing all the cameras. is this possible ? Thanks in advance

hikvision Nvr i2 accusense motion detection working on ezviz wireless camera LC3 but (ai by nvr) not work on it, others hikvision cameras working. plz help

Hello, I have found myself back with the good old fashioned traditional problem of the WebServiceComponents plugin not working properly. My system has a DS-7716NI-E4/16P NVR which is **FULLY UPDATED** to the most recent firmware, a DS-6704HUHI-K which as far as I'm aware there are no firmware...

How can I read the card number from a Hikvision access control system (Hikvision DS-K1T341AMF Face Recognition) using RS-485 communication, specifically through a USB-to-RS485 TTL Serial Converter Adapter (such as the FT232 module) connected to a PC or by using an Arduino with an RS-485 TTL...

Just purchased a second hand (But supposedly brand new) DS-7616NI-K1 NVR. Upon arrival, it reports firmware version V4.72.107, Build 220914. What has me confused is the different hardware versions, specifically (B), (C), etc. My NVR states 'Hardware Version: B-R-K9B2-00', which made me...

Hello, I have just bought a DS-2CD2347G2H-LISU/SL camera for use with a DS-7716NI-E4/16P. The camera is brand new out of the box and so I connected it to the NVR with 'Plug and Play' to PoE port 3. The camera works fine, but where the problem lies is that the link to the NVR drops out regularly...

Hi all, trying to figure out the latest firmware and specifically which package to use for this camera. Product details: DS-2CV2Q21FD-IW It's sold in the US, EU & Asia, however, it's an EOL model. Current details off the web interface: Model DS-2CV2Q21FD-IW Firmware Version V5.5.101 build...