Search results

ok so again @Kyle, you were spot on thanks! Also i think i was trying to go over multiple line crossing lines on the same camera too quickly. Even going over the same line within about a minute or two doesn't cause an alert - maybe this is intentional?

ok so at some point it looks the encryption key got wiped! filled it in and reinstalled the local component service (just in case) and the live view is working now! Thanks! i have just one more issue left. One of my line crossings seems to be only intermittently alerting. There are 3 line...

Hi yes i have entered it, but it would have been post me adding/connecting the cameras. I hope that doesn't matter. Here is the screenshot you asked for

Hi @Kyle Long time no speak! Ah ok i thought i'd screwed something but the big jump makes sense now I did actually find this newer version and upgraded - it didn't wipe my replaced settings, which is good. But i still can't view the live view of any cameras I should have been more specific...

Hi there I recently upgraded my DS-7608NI-I2/8P NVR to V4.61 build 220507. I don't know what happened (maybe i chose the wrong firmware?) but it wiped all my settings. I just spent ages putting it all back in and think all is ok. I get line crossing alerts, etc - but now i cannot see my live...

Hi Hmm ok. Maybe the monitor unit also would ring? Do you know if I could get it to ring on my phone and my wife’s phone at the same time? I’m guessing you can’t wire it in to an existing wired doorbell either? I would only want alarms to go off when the button was pressed. Not something that...

I don’t have a camera at that location. Plus I have other people in the house who don’t have the app and need a more ‘traditional’ non tech setup

Thanks so much for your reply I thought you had to use the station to set it up and use it, etc? Do you rely on your phone to be alerted to the doorbell? I need something audible to be heard throughout the house?

Also can I please ask 1. If I use the monitor station (I think I have to) how loud is the chime? 2. When adding the camera to the Hikvision app can I silence the other cameras but have the doorbell alert? Currently I can only seem to silence the alarms on the whole nvr Thanks!

Hi! I would like a Hikvision doorbell for my house to integrate with my existing NVR. I’d like for it to - record all the time to my nvr -alert my Hikvision app and my wife’s (same login) and make an audible noise in the house like a traditional bell - Not look too industrial I was looking...

Hi You are right! I'm not sure why they are different I bought them all at the same time from the same place and previous upgrades have all worked on them all. I'm now upgrading with the G5 version

Hi I am trying to upgrade my cameras to the latest version. They are all the same and have similar serials. I downloaded the 5.5.801 firmware from Hikvisions site and it worked fine on 2 of the 3 cameras. The third camera just says "The type of upgrade file mismatches" or 'failed to get upgrade...

Hi I have a new 7608NI-I2 and i don't see any markers come up in the browser showing me alarms my hik-connect app has told me about. I have continuous recording setup. I don't know if it makes any difference but i moved these hdds from another NVR (K series). I don't see markers for any...

Ah ok I think it was this that confused me then. So it sounds like I still need to configure smart events via the cameras, but my I series will record it as an event?

Hi all, First i must thank you, this post led me to realise i was sent a K series NVR and not what i ordered. I now have an I series DS-7608NI-I2 / 8P and upgraded to the latest firmware (V4.51.025 build 210927). However, i still can't see target validity in the NVR menu - only the camera web...

Hi all, I got a DS-7608NI-I2/8P recently, or so i thought. I have set it up and linked to HikConnect, etc. but when was trying to set up a smart feature, i realised i had actually been sent a DS-7608NI-K2/8P! So i now need to return the NVR as new. What is the best way to do this and allow...

Hi They are a couple of seconds out from each other when viewed on the monitor. They are pretty much equidistant from the NVR.

Ok thanks. Is splicing easy?? Also what width is that 2 pin connector please

Hi Ok great and thanks for your reply. So it sounds like I have done the same as you but the cameras are still a couple of seconds out. Why is this? Unless you are saying I need to remove the default ntp config that came on each camera?

Hi I've followed the threads on this forum to set the NVR and the Cameras to use pool.ntp.org as the time source. The cameras fail the server test but i think this is expected as they are directly connected to the NVRs over PoE. The issue is that the cameras are about 1-2 seconds out of sync...