Search results

"Device decoding timed out. Check the device network connection" If loading ends then pressing refresh loads next event. Otherwise continuous loading for ever... App Log out, clearing cache, clearing Data did not solve problem. App installed from Hikvision App Store on Samsung S21 Android 14...

New firmware v5.7.18 build 240924, but this is only added for new motorized ones. There is release notes and inside supported product list, there are all G5s included. The good thing for those that can use GUI 5.0 firmwares(v5.7.17 and v5.7.18) is that except PTRZ, New and Modified functions...

Installed on DS-7608NXI-K2(K20A9) with two ColorVU G5 Issue of not Saving Camera VCA Data for "Others" target remains the same after updating ColorVU G5 either to firmware v5.7.17_24071 or firmware v5.7.18_240826. VCA Resource is set to Smart Event for both cameras Enable Dual-VCA is enabled...

There are no Release notes yet https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/ds-2cd2047g2h-liu/?subName=DS-2CD2047G2H-LIU

With release notes..... No other NXI-K model shows this firmware for the time being. Not even DS-7608NXI-K2/8P or NXI-K4 https://www.hikvision.com/en/products/IP-Products/Network-Video-Recorders/Pro-Series/ds-7608nxi-k2/

Experimenting today and after going back from firmware v5.7.17 to v5.7.15 for G5 platform noticed the following for DS-2CD2047G2H-LIU and DS-2CD2047G2-L connected on DS-7608NXI-K2 : iVMS4200 Remote Playback - Camera select for play - VCA Search - Enable Motion Detection, by drawing 100% of...

Batch Configuration tool gives a warning of "End of servicing" so suggests the new one HiTools Delivery So installed this to test. Setting(Configuration) is similar to iVMS and browsers and does not have the old style of Batch Configuration tool. Devices are all detected but there is a...

This is inside Temp folder for G5 Platform EU portal as digicap.dav. No zip, no info.... Completely new look Testing now on 2047G2-L Also new firmware for NXI-K NVRs 4.82.100_240606

Hikconnect V6.3.0.0424 "Number of streaming channels exceeded limit. Please stop playing other channels of the device and try again" New Hikconnect issue during Playback either Continuous or Event. No other device playing back by that moment. This warning did not exist in previous versions...

New firmware for all Accusense K series NVR There is no Release notes again Issues remain the same Event playback on NVR GUI and on Hik-Connect app, pre-record (event start markers) are wrong once again and there is a delay for the markers of 5 to 10 seconds after target detection. The target...

Issue 1: Both DS-KV6113WPE1(A) and DS-KH8301WT are recognized as Device Access Switch when added manually on NXI-K2 Accusense NVR. But there is no option to be recognized as Video Intercom stations, although both are supposed to be a kind of Access Control Devices. This should be convenient...

New firmware V4.82.000_240224 almost 70mb of larger size than previous V4.76.015_240108. Same Home Screen with slightly different icons for Live View, Playback Search and Configuration. In Configuration Event there is a new option called Smart Scene Detection of Throwing Objects from Building...

Could you please, given your experience, suggest Dahua Wizsense series as an alternative to Hikvision Hybrid ColoVu LIU series? Is it the TiOC series the closest one? I am thinking of replacing DS-2047G2L/G2H... ColorVu with IPC-HDW3549H-AS-PV

New firmware V4.76.015_240108 for Accusense K series available on Global Hikvision webside for DS-76xxNXI models K2 and above. There is no Release Note for this firmware and the size of the new firmware(152MB) is 25MB less than the size of previous firmware v4.76.005.231012(177MB)

Camera is over main home entrance, an angle of about 45 degrees, a height of 2.60 meters, heading is South-SE, and camera's lens top is reaching a distance of 15 meters. Sensitivity is 100, Threshold(s) is 0, Alarm Validity is Basic, Intrusion area covers all front yard until the limit-border...

Anyone knows why Degraded area, outside ROI area(region of interest), remains high resolution, good detail, when H265+ is selected?

ColorVu DS-2CD2047G2-L in all Smart Events has a setting for Threshold time. As described in Help: "Threshold Range [0-10]s. The threshold for the time of the object loitering in the region. If you set the value as 0, alarm is triggered immediately after the object entering the region" By...

VCA Target Highlight does not exist on playback or live view Minimum (5 seconds) or maximum possible pre-record (30 seconds) on camera do not work. Auto Event playback starts 5 to 10 seconds after the target is gone on any resolution or bit rate for DS-2CD2047G2-L ColorVu. No option to manually...