Search results

I just tried it first time today (both EZVIZ web and the Hik-Connect app). Find them slow loading 5 cam's and I like the iWMS-4500 app better (seems loading video faster) and able to 'swipe' between the different videos that's load instantly. But will run both for while to see pro/cons

see page 44-45 in the NVR user manual (You can disable the PoE interface by selecting manual). http://www.use-ip.co.uk/datasheets/hikvisionnvrusermanual.pdf

Random reboot issues. I as well linked the reboot issues to my access from iWMS-4500. However, just look deeper into the log details, and realized today, that when my NVR makes an abnormal shutdown, this is often after several attempt with unsuccessful login?? Could someone check whether...

Anyone that can share a review of HIK-CONNECT versus iVMS-4500 ?

I read it, as existing users will not be effected (previous registered devises will continue to function on the HiDDNS platform).

Just to confirm, yes, the 2142 can be mounted vertical on a wall. I have two DS-2CD2142FWD mounted vertical on the wall and three horizontal on the roof/overhang. The two vertical mounted are both mounted with the DS-1280ZJ junction box. I have as well chosen to use this junction box for one of...

Ben, I experienced the same when tried to install the update attached this thread (English version of upgrade 3.4.6) to my 7608 NI-I2 I had the multi language v 3.3.6. installed prior upgrading. And failed when used the file from this thread. But the upgrade went fine using the v 3.4.62 multiple...

Thanks, ;) just upgraded my firmware to V 3.4.62 yesterday eve and until now running fine

Any one who has upgraded to ver 3.4.6 and have runned this version for a while that can confirm no issues? And anyone who know the difference on version 3.4.6 vs 3.4.62 ? NVR_K51_BL_ML_STD_V3.4.6_160405 NVR_K51_BL_ML_STD_V3.4.62_160503

For the Hikvision NVR DS-7608NI-I2 latets firmware release from 151228 contains two versions of the firmware file: NVR_Hi3536_BL_ML_NEU_V3.3.9_151228 and NVR_Hi3536_BL_ML_STD_V3.3.9_151228 Do you know the difference?

What is your advise, keeping H.264+ active or not? All 5 cams are directly connected into the NVR. Presently I have no disk space issues. However I guessed (without knowing it at all) that the compression would make the disk work better(less busy) as less incoming data?

Kieran. I have updated the firmware on the cams to v5.3.6 and on the NVR as well to v3.3.9 as seemed changes on nvr was not sync. to cams. That working now. And seems already that the cam upgrade has the intended effect on the image flickering. I keepted H.264+ active on two of the cams and...

Thanks / Yeps, all cams connected directly to the nvr. And the NTP seting works fine on the NVR. Willwatch whether cam's follow the time of the NVR over the next one-two weeks

cams delivered with installed firmware V5.3.3 build 150630 and nvr V3.3.7 build 151102 Yes H.265+ enabled

Have tried few alternative ntp server and all failed. The cam ipaddress is set by the nvr to 192.168.254.4. Can access the cam directly through the 'virtual host' functionality of the NVR. Could it be because the cam ip is not known by the router (I assume)? The cam ip has been assigned by the...

I have for around two weeks had 5 DS-2CD2142 cameras runnig connected to one DS-7608NI-I2-8P NVR. have done few experiences on the settings. And configured with all day 24/7 recording it works fine I have tried setting up motion detection, intrusion detection and line crossing detection (only...

I have 5 DS-2CD2142 cameras and one DS-7608NI-I2-8P NVR. However not success full in the setup of time sync to NTP server as above. When testing get failed. I have tried to reconfigure the network setting in the camera to use gateway and dns as my route setting without succes as well. Also use...