Search results

I hate IVMS with a passion it’s slow and useless but in this case for event viewing with the markers it may be your only option as Hik broke the function in the browser. Like you I found it super handy to have the little markers for events then one day I updated and boom no more markers…...

It wouldn’t even be so bad if when clipping you could drag the time bar area or highlight the segment you want but instead you have to sit there for x amount of minutes and watch it whilst you wait for where you want it to stop

Here is a prime example…. We have 30 of these units out across the country , I’ve just dialled into a random unit and asked for 5 minutes of footage (see times on the left) it returns 01:55 that’s a blatant fault in the firmware! Also note that on this nvr the packet sizes etc are default

Apologies for the rant it’s just a crap way to do things lol, with regards to the packet sizes I have looked at this before however in the example of the requested 1 hour footage from the previous night I put in 17:08 to 18:08 and the nvr returned one file for download: 16:28 until 17:15?!

Even short footage is an issue if you want to download 10-15 mins of footage you either sit through it or play Russian roulette with the times you enter and the times the nvr decides to give you. mice been an installer for over 15 years and these hik Nora are terrible when it comes to simple...

Hi Gurus’ I need some help! I have a remote system miles and miles from me and need to download about an hours worth of footage it’s a DS7608 NI k2 nvr. the footage is around an hour so I don’t wanna clip it as I’ll have to wait ages to get the footage, if I hit the download button and select...

Just for future reference you can enable mic direct from the NVR Goto advanced>record>parameters and change the video pull down menu to video and audio… no need to go into the gui

Ok can now confirm same problem, do not update to this version

Ive had this problem before if you try to restore a ds7608/ni k2 with a backup from a different k2 you have to default the machine to factory to regain access to hik connect or what ever you try it stays showing offline. sounds like you have the similar issue mate

So anyone updated Hik-connect to the latest version on iPhone and had problems with it closing after a few seconds?! (No stupid iPhone android waffle please) the latest update for me just crashes when opened to the point I had to delete it completely and reinstall the app!! the ball ache is...

I think we are on different subjects, for a domestic installation where the cameras probably no more than 2 meters off the ground and doesn’t have to be overly loud it’s fine. however this is in an industrial setting where a louder noise is needed, at best this is maybe as loud as a slightly...

It’s crystal clear on mine, can even hear bird song. Are your settings correct? As posted above - That’s not what I am saying mate, the audio is clear but the output ( I/e when I speak in the mic and it plays from the camera it’s self) is way to quiet even if I set the volume to max in the gui...

Ok on a related note even at 100% the audio output is far to quiet when used. Can this be connected to an external amp and speaker system using the green audio I/o cable does anyone know?

I really appreciate all your help but i am having no luck at all, with your last command this is the result i got:

Ok so checked and isapi has a tick in the box but is greyed out? That being said if I run /ISAPI/system/capabilities I do get a loaded xml displayed?

ok so obviously i have substituted the pasword and ip here but when i try your commands i get the following error: C:\Users\secur>curl -X GET "http://admin:nope>@192.168.1.106/ISAPI/System/Video/inputs/channels/1/overlays/BatteryPowerOverlay" <?xml version="1.0" encoding="UTF-8" ?>...

Ok this is super helpful and I have learned a lot just reading your post, where it says <ID> How do I find the camera Id? I have 4 connected to the nvr and would ideally like this overlaid on each individual camera

Hi Jami, I read in a post you may be able to help with using isapi. I have little to no knowledge on this subject despite being computer savvy. long story short I need to implement the code from section 8.4.52 of this document to get a overlay of the camera voltage onto the osd. HIKVISION...

No direct use mate but appreciate the help

Hi Guru’s I need some help! so I came across an osd in hik-connect on a hik camera that used ISAPI (little to no knowledge on this) to overlay the battery voltage onto the OSD. this would be super useful and after a lot of head banging I found this document that explains briefly how this is...