Search results

Could be that the camera was damaged and lens are dislocated inside

That cannot happen, you can only set delay when it will call hik connect not ivms4200

Its a bug in latest version, wait for an update

No power needed, you can actually short circuit them and you should hear ding dong

Such a modern looking apartment with coax cable. What a shame

Yes there is one, shown on image above, tested now and it delays it

There is setting called Forwarding time or something like that. Set it to 0 if it isnt. This means after how much seconds it will forward the call toward application

Yes, connect any AIN from 1 to 8 and GND Then define that Alarm input to be doorbell.

I believe Hik-Central professional can do this with their linkages, But then again you would need HikCentral mobile app instead of hik connect

This would require 3rd party software utilizing this Have a listener on Alarm panel, wait for arm/disarm events Once it happens, use ISAPI toward NVR to enable/disable NotifySurveillanceCenter

Buy stronger adaptor with more amps.

1. Color at night You still need to satisfy minimum light needed for color mode. Models can go far bellow to 0.0005 lux needed for color mode. But usually that dark with color will push shutter speed as slow as 1/25. Which on fast motion will look like a smudge. Currently there is no Camera...

Both

Glad i helped :) Cheers

Go to HDD settings and do Rebuild database, it will work afterwards

Here. Do this with Batch Configuration tool on camera. It will disable modern security and it will use old security protocols.

Jamming is related to wireless, don't believe jammers work on wired counterparts which you currently use. Only "jamming" that could happen in wired counterparts is that someone already have access to your local network and DDOS the CCTV. Still you wouldn't have problem with your video recording...

Perhaps the camera does not support PoE this way. But understand standard 802.3AF which does not use 4 and 5 pin for + and - nor 7 and 8 It uses orange and green pair to transfer network + power

Could be either you logged out from your cloud account, if you used one. Or if it was locally added, then problem could be that they are on DHCP and got new ip addresses from router due to powerloss,DHCP refresh interval, or any other reason.

1.2.9 and 1.3.0 is a huge difference. Without factory resting after upgrading/downgrading. You will be left with glitches from previous firmware leftovers not cleared from strctures.