Search results

Okay, you will go with SM https://www.hikvision.com/ph/products/Accessories/Transmission-and-Display-Accessories/SFP-Modules/HK-SFP-1-25G-20-1310/ https://www.hikvision.com/ph/products/Accessories/Transmission-and-Display-Accessories/SFP-Modules/HK-SFP-1-25G-20-1550/

With no disrespecting at all, but wouldn't it be better for you to hire a installer that deals with fiber so he can lay down network for you ,so you can finish intercom? Can you tell me what fiber cable exactly it is? There should be marking or label, write it here. Then i will tell you which...

Does it says online in platform access when its enabled? Dont mind menu, this is from DVR, since i turned off camera. But camera got the same menu

Is the gateway and DNS correctly set? Does the Platform access says Online - Meaning it got access to internet? Other than that i have just tested on DS-2CD2663G2-IZS (C) and it worked without any trouble. Only thing that might block you if your youtube studio is opened for the first time and...

In the url you need to combine both url + key from youtube, so its looks like rtmp://a.rtmp.youtube.com/live2/1111-AAAA-2222-bbbb-3333 As you can see it works. I used the same firmware on test camera

Will go with SM or MM variant?

Try out and let me know. I just said 3rd party might not work with hikvision fiber modules.

Did you factory restore after upgrading firmware? You should have a another input to insert youtube stream code.

Media converter's will give you additional 4 points of failures. Both media coverters + their PS Less maintenance with better switches and fiber modules. Ill let you know tomorrow. If you going to use 3rd party switch, hikvision fiber modules might not work. They had problems in the past with...

yes ofc thats why you will have 2 switches on both ends. Internet will be connected to lets say Port 1(switch1), fiber will push it across to switch 2 and port1 will be door station

https://www.hikvision.com/europe/products/Accessories/Transmission-and-Display-Accessories/SFP-Modules/hk-sfp-1-25g-1310-df-mm0/ https://www.hikvision.com/europe/products/transmission/Network-Switches/Pro-Series/ds-3t0506hp-e-hs/

I also need to say that door station lock 12V output will most likely not work and you will need to add external PS over door station relay to trigger elock.

You could have gone with single mod as well(cheaper), does not matter. You don't need converter , you can go with 2 new switches that support SFP and get yourself a SFP module that goes at each end. Then you dont need converter from fiber to cat If im not mistaken, since you have 2 optic lines...

Or get yourself a quality access points

The problem is the cable, cat5 is the worst you could chose for 280 distance. Okay your PoE switch supports Long range PoE transmission but once you turn that on the bandwidth on that line will drop to 10mb/s. And considering its cat5 you will lose even more of that 10 mb/s. If you have an...

Theres only 1 reason why it shouldnt, and that NVR had DNS set on old gateway which is different ip than new one.

It could be you have multiple organizations and that user already exists in first, and you are sending both to device. You said you are getting on just few devices that error, that's because that particular user have permissions just on those particular devices. Poor image quality: Problem can...

If i explain why it does not work, it will become even less understandable. But ok lets give it a nice try: Hikvision devices comunicate with hik connect cloud via OpenAPI which is available for integrators to get documentation on it. Depending on device firmware, certain functions and nodes...

You are my case scenario number 2 from my previous post :/

Like ive stated in previous post, SD card is not mandatory for screenshots. They should work regardless, but limited to 50 images which will be overwritten as new one comes. Good luck