Search results

Many thanks - I will give the above a try and keep you updated. Thanks

Hi I have checked the above and each camera has the schedule set to Continuous recording (see pic below for one of my cameras) but still have the issue in that when I reboot the NVR or does not start the recording for each camera so I have to Start recording on each camera manually. Also...

Hi My Asus router is not connected to my ISP router. Also, I have been trying to get remote access to work on my own NVR and it has worked in some way. - I.e I can remote access to my NVR and can see/change config setting. However, if I go to the camera management section on NVR and try and...

Hi Just seen that and replied. I will give it another go at some point. Thanks

Hi I understand most of the details on here - it’s just the bit trying to access it but like you says I’ll try it from a different network. 1. My internet provider is BRSK. 2. My router is an Asus RT-AX82U and can setup multiple port forwarding ports - eg. 80, 554, 8000 (or whatever I have...

Many thanks for the confirmation. I will check this once I go over to my daughters house. I’m still trying to work out how to set remote access to NVR but having no success - I have tried the following https://www.use-ip.co.uk/forum/threads/remote-access-to-nvr-for-configs.10384/ Thanks

HI JB1970 Thank you for your reply - I will check this and make sure it’s set. Also, just to confirm that I do this on the NVR gui settings and not on each camera gui config. Thanks

Hi I’ve come across the following issues since installing the system as below but not sure if this happened before or after installing the latest NVR firmware from the links on this forum. 1. Whenever I reboot the NVR, the cameras do not start auto- recording so I have to choose “Start...

I’ve got the port forwarding bit sorted but have the following issue: Working from my iphone: 1. Port forwarding set up for 554, 8000, 8080 (http) 2. If I leave my Wi-Fi on and use the check port tool then I get a Success and it picks up my isp ip address which is correct and I can log into...

Hi Dan Many thanks and will give this a go. After setting up port forwarding do I need to reboot the router? Also, once set up, to access externally do I enter http://(isp ip):80 ? Thanks

Hi With the help of family member I have installed a new Hikvision IP system in my daughters house as below which is working perfectly but requires some config tweaks like frame rates, WDR, bitrate settings etc. which I can do on the local network through the NVR web GUI as I’ve also got the...

Hi Many thanks for the confirmation - this is something I didn’t read so I’ll def will be going with the M2/8P to get the PoE ports. Thanks

Hi Is there a difference between DS-7608NI-M2 and M2/8P as they both seem to support up to 8MP cameras on all channels and they both have 8 ports? Thanks

Hi JB1970 Many thanks for your detailed reply. With regards to the Color Vue cameras, I have the led disabled as it causes too much light with my dusk lights being on at might As it’s not a very large property to cover, I was thinking of getting the 4mm 3.4? Models but couldn’t decide on the...

Hi I currently have DS-7608NI-I2-8P with mixture of ANPR, bullet and 3 x 4MP Turet Color Vue cameras all working well. My daughter is in the process of her new house purchase with no cctv currently installed. I’m looking into what system to get her so would appreciate any advice on following...

Hi No never managed to fix it but I’m wandering whether it’s because I’ve got the camera to use H265+ enabled which I think disables some features.

Hi Dan Thanks for your reply and that was the next step I could think of so just need to try and find a device I can connect it to. thanks

Hi all I had my newer model DS-7608NI-I2 /8P installed in April and used the 3TB Purple WD HDD from my previous NVR model and am running five cameras in total. I have purchased an additional same model 3TB Purple WD drive to add as a second drive but when I power on the NVR the new hard drive...

Hi I have the DS-7608NI-I2 /8P installed in my living room and the noisy fan issue. I have gone and ordered the Noctua NF-A4x20 FLX fan to try and reduce the noise. However, without cutting wires, soldering etc, I saw on YouTube video that you can buy a 3 pin to 2 pin adapter cable to fit...