Search results

Ordinarily your supplier will preload the ANPR camera with firmware :) I have a DS-7608NI-I2 / 8P running a V5.4.7 build 180309 on a DS-2CD4A26FWD-IZS/P V5.4.7 build 180309

I have the same camera in ANPR mode. You need to log in to the camera via a webpage to do the advanced setup, the NVR will only do basic setup. My Image settings are: Exposure Settings Iris mode "auto" Auto Iris level 100 Exposure time 1/150 Gain 100 Day/Night Switch: Smart supplement light...

Can you be more specific with your version? Mine used to work but the option to upload directly to YouTube is no longer there. is no l

Update: DS-2CD2232-I5 substream error: Hikvision technical traced the substream error to firmware (V5.4.5 build 170123) that the camera doesn't support, so downloaded V5.4.41 build 170312 then reset IPC and rebooted NVR and now working correctly. This camera is a "R0" series 2**2 and I had...

The post record problem has only existed since upgrading / downgrading V4 firmware, it worked ok with the previous V3 configuration. Its very irritating as when a line crossing activation is sensed I get an instant push notification of the event but when I go to view the footage its blank. Also...

I have tried all manner of settings and still cant get the Post / Pre recording to work since upgrading to V4.1.64 build 190119.

Thank You :)

DS-7608NI-I2 V4.1.64 Build 190119 Recording Schedule set to Motion Record 24/7 Advanced Settings: Pre-Record 10s Post-Record 10s Recorded Activations are only showing the motion event and no pre or post recording. Is there a setting I have missed? Thanks guys

Hello. Im considering upgrading my current DS-7608NI-I2-8P 8CH 3TB nvr to a Deepinmind DS-9632NXI-I8/16S 12MP with 8TB storage. I understand I will need a Powered 32 channel POE switch to feed the new NVR. So is it worth it and what are the benefits to a home user

In my opinion V3 was a very stable platform and simple to navigate and used far less resources on the i series recorder. I reluctantly upgraded to V4 and initially found the layout busy and over complicated to perform a simple task when using the GUI interface. Recent V4 firmware updates...

Great Forum Phil and my first point of call for anything Hikvision. Lets hope any future firmware is fully tested before release, the recent buggy updates have put me right off updating clients systems.

Hello. Has anyone got any user feedback for the new range of Hikvision 4MP cameras with Darkfighter technology? I ask because several years ago I sold all my 4MP EXIR bullets because of the poor night time performance and exchanged them for the 5MP version. Today I'm pricing up a order and I...

I get random attacks on my NVR (see picture) if I were you I would turn off email notification or it will drive you nuts.

Further update: :( Managed to get the G1 DS-2CD2385FWD bandwidth error fixed with V4.1.63 build190111 but now the older DS-2CD2232-I5 is now not letting me set the "mainstream channel to anything larger than 704*576 (4cif) on the V4 GUI. I can select the higher resolutions on the web browser...

Have rolled back my DS-7608NI-I2 / 8P to V4.1.63 build190111and substream now working on IPC DS-2CD2232-I5 :) But still getting "Bandwidth error" on DS-2CD2385FWD-I next step is double check firmware on this camera although it successfully updated my other G1 IPC cameras without any issues...

Substream error update on IPC DS-2CD2232-I5 Have carried out full factory reset on IPC via web browser and restarted NVR and problem still there. Substream bandwidth error on IPC DS-2CD2385FWD-I Have carried out full factory reset on IPC via web browser and restarted NVR and problem still...

Feedback after a weeks use of V4.1.71 build 181121 1..Smart search is now working again 2.. IPC DS-2CD2385FWD-I substream will not go any higher than 1280 and any attempt to increase is met with a pop up message “Bandwidth Exceeded” (worked ok before update) so have a weeks worth of footage...

Stefano, Mine was doing the same on the previous version before I upgraded. Every time I tried to enter the email details on the nvr as soon as I selected “test” the nvr froze and rebooted, so I didn’t bother with email notifications and instead used “line crossing” and setup push notifications...

I upgraded this evening to V4.1.71 Build 181121 from the link you posted on the 7th January.