Search results

Its because hikvision restricted cloud access with newer firmwares on wifi cameras. Its not issue on your side

I would suggest using either intrussion or line crossing for trigger. Motion tend to have lower rate of detection for human vehicle

If it works unplugged and flashing when you plug in, sorry to say your dvr pins might be shorted meaning faulty dvr, or power supply dont have enough amps, or hard disk is at fault and eating too much amps. It can be any of those 3 components, easiest is to try with new supply. Older models...

https://us-legacy.hikvision.com/en/products/cameras/network-ptz-camera/smart-pro-series/standard/outdoor/2-mp-outdoor-32x-network-speed Just googled firmware, first link literally

Run in internet explorer mode and install plugin. Its a common issue that old cams didnt have all the plugins within web.tar.gz within firmware, so it had to relay on outside plugin like this.

New firmware is out. Enjoy

I2 will be obsolete even in vpro series

I received 1 vpro around januray from hikvision for testing. This firmware also adds option to select false alarms and actually learn device which alarms ae not valid. It will not do it anymore, reducing it even lower

There is video from acuseek on nvr, i havent sen 1 yet on web browser and hik connect

Acuseek is reserved for /VPRO nvrs and aswell ids 96 series /x ONce you enable you lose alot of vca for non smart cameras. It works great. Tested on 96 series

Thats how firebase messaging on hc app and polling is set on their side. So thats it, you cant have more frequent. Only if you use their hpp or hc api and make your own app

Did you upload custom aiop application to nvr? Its like HEOP but in aiop case hikvision provides one. Heop is up to user development and learning

Use AI to create a small flutter app with a single button that will use ISAPI http put request to open door

Thats how external doobvell works

Ise hik central access control or ivms4200 to configure it

That controller doesnt have web interface, it has http traffic via isapi api but not actual web

There should not be any limitation, hilook,hiwatch,hikvision is all same software.

Im sorry to say but it was prolonged till end of july. Reasons unknown atm. Lets hope its for the better

You can re add, but each device has to be manually resetted. For example keyfob: Remove battery, and reinsert while holding disarm key As for PIR, remove battery and gold tamper while you insert battery. Pretty much same for all devices. Only then you can add to the panel

there are multiple reasons, just scroll this forum with 1.3.0 firmwares