Search results

All 7 cams using between 3 and 4 watts each therefore the switch is easily capable of dealing them plus more.

Hello David No I haven't really considered that but can see it might be an issue. I'll have a look at what power usage I've got at the moment. I didn't purchase the switch, it was given to me so it's not a loss if it's not going to be any good. Cheers

Hello Dan I think you hit the nail on the head, I just didn't understand what connects to what and presumed it's the way I described it. know. The reason for having the switch is the usual too many cables go into the nvr, making it a bit more tidy and allowing me to move the nvr around...

Hello David 5 of 4mp G0s, 1 6mp G1 and 1 of 8mp G2(c). I realise the switch may struggle with the bandwidth with all cams working but I'll give it a go. My lack of knowledge and understanding is with process and connections for setting this up rather than the settings (other than anything to...

Good Evening I have a 7608p NVR and 7 poe cams. Cams are currently connected directly to the NVR ports and the NVR is connected to my router. All works good HIK Connect, etc. I'm looking to alter the connection so that cameras are connected into a POE switch, POE switch is connected to NVR...

Yes no problem Phil. Remembering this is version 3 software and not version 4. The setting to change both VGA and HDMI output resolution is found as an option in the General tab of the Configuration menu. Click on the image below to see.

DOH. Find the setting should have looked a bit closer. Sorry for my ignorance

Edit. Data Sheet says. "HDMI Video output of up to 4k resolution". So the question now is how do I change the settings on the NVR to achieve that as I cannot see the option. I am still operating version 3 firmware. It is the latest version.

Apologies for this very basic question. Video output via HDMI of my K2 NVR is 1080P hence resolution of 1920 x 1080. It's connected to a 4K monitor, resolution of 3840 x 2160. My cameras are set to record footage above 1080p resolution. I'm presuming that due to the NVR's video output...

Never had a problem with crimping. Take time and care and you will get there

Thank you very much for your reply Dan.

Dan The m series product pages show the 8 channel nvr having "Up to 8MP Decoding Capacity" But all other m series NVRs having "Up to 4MP Decoding Capacity". Why only 4mp.

Thank you for your replies and advice. Yes the lines / blinds definitely look like some kind of electrical interference, hum as you call it. Not seen it at all on other cameras but I'll get round to messing with it at some point over Christmas and I'll let you know how I get on. Hope you...

Interesting what's going on here I have the same pausing or skipping when an event happens. Whether it be VCA or motion. Also so even though the image is pretty clear I get lines from left to right moving up the image. Quite noticeable at night. Haven't investigated either issue yet.

Brill. Thanks a lot. I did look but not closely enough.

Hello JB Hope you are doing ok. Can you point me to where the white light settings are when using the browser for this camera. I can't find the basic things such as enabling supplemental light and adjusting the brightness of the LED. On my to 2347G1 the settings are under System Settings /...

Thank you again this thread is an example as to why this forum is absolutely fantastic. The level of technical information available from experts like JB and of course Dan and the other members of use-ip is invaluable, especially when most of the stuff coming out of Hikvision is parrot English...

Never come across that one. I like how I can use the timeline to search for evernts easily on V3 and draw lines on playback also. To be honest I realise bugs happen but apart from security issues, if it works then I'll stick to it for now as V4 seems a whole new learning curve away. May have...

Hello JB I have had a 2387 C for a couple of weeks but only set it up for some temporary internal use so not compared it to my other G2 4mp colourvu as yet so was wondering how you got on with the C cams you purchased.

Same here k series nvr 6 cameras added 7th camera and bell icons appear on all notifications. Was like that for a week then without making any changes to camera, nvr or iap icons back to normal. A Toyah Willcox moment if you know what I mean.