V5.03.020_240904
Is out
https://www.hikvision.com/en/products/IP-Products/Network-Video-Recorders/Ultra-Series/ds-7616ni-m2-16p/?q=ds-7616ni-m2-16p&pageNum=1&position=1&hiksearch=true
Tried the power down and off and no improvement,still thinking its prob at hiks end as it was not an issue weeks ago.
Umm well maybe if there is another hik connect server to try ?
NVR is set on litedev.us.hik-connect.com with the custom box ticked.
OK good idea for in house or within earshot.
I was thinking of something to transmit the alert via my wifi so if I was way down in the backyard the phone would alert me with no delay. Something continue to ponder .
I will do the power off/down idea.
Cheers
2387 cam line crossing and intruder with a 7616ni/m2/16p into asus router . I hear the nvr beep within a second but the time taken to go thru hikconnect and the s23u phone has been shocking the last week 90secs +.
100mbit internet here which I've checked and tru put is 106mb. Rebooted all...
I am looking for a device that would take the alarm output contacts on the back of the nvr and connect to my local wifi which in turn send a alert on my android phone.
The reason being I often find the delay with hikconnect can be slow and the courier at the door has been and gone.
There is next...
I notice that when logged in via firefox browser to the camera ds-2cd2387g2-lu that under config/event intrusion and line crossing dont show up when clicking on the pull down. So I went into the search at the top of the screen and typed line crossing then clicked on the result and line crossing...
Just noticed this seems to be the latest offering
https://www.hikvision.com/en/products/IP-Products/Network-Video-Recorders/Ultra-Series/ds-7616ni-m2-16p/?q=ds-7616ni-m2-16p&pageNum=1&position=1&hiksearch=true#download-agreement
Motion detection.
Logging on via the web to the camera shows the same setting has transfered from setting on the nvr using hdmi monitor over to the camera.
Tried all settings from 0 to 100 in steps of 20 in the nvr will nil effect.
So my guess is the 2387 which is on port1
I have 5 old 2385s...
Movement sensitivity adjustment makes no change I have noticed.
Set it to 0 in the nvr gui and it still triggers.
Nvr
Ds-7616ni-m2/16p v4.63.025
Cam ds-2cd2387g2 v5.7.14
Anyone else find this.
Thanks
I now have found settings which produce smooth non jerky live viewing of fast moving cars.
3840x2160
Constant
Medium
25fps
General
8192
H265
I frame 50.
Time will tell fingers crossed
Hope it helps you