Recent content by StefanoB

@trempa92 Great!!! Thank you so much!! Now the camera works!!

Hi @Dan, I have update the dvr and it still works! ....but not the camera... I have updated the dvr first to version 3.0.15. The first thing that happened after the restart was a pop up windows asking for a stronger password. So I changed the dvr admin password. Then I had to update also the...

Thank you @Dan. I will cross my fingers and update the dvr...

OK @Dan, I will update the dvr in two steps. What I'm worried about is the possibility to brick the dvr. Is there an "emergency guide" to recover a bricked Hikevision dvr? Thanks.

Hi @Dan, reading other post in this forum I found one about firmware and using the sw HiToolsDelivery I found a firmware for my dvr, but it is the V3.0.15_150528, older than the one you suggested me. Do you think it is safe to update directly to the newer one or it is better a two step upgrade...

Thank you @Dan. Will the update keep the current configuration? Will the other 7 old cameras (DS-2CD2632F-I) still work? If something goes wrong, is there a way to recover?

...I can add that the dvr firmware version is V2.3.7 build 131112

Thanks Dan. Yes, this new camera require a stronger password than the one set in the dvr. I tried to do what you suggested, that is similar to what I did. The old cameras have addresses from 192.168.254.2 to 192.168.254.9 so this new camera has IP 192.168.254.30. Using a browser I can reach the...

Thank you @Dan. The first thing I did after taking the camera out of the box was to connect it to the DVR but it did not work, I get another message that now I don't remember, but it was not possible to add the new camera. So I took a step back and ....RTFM.... with SADP I activated the camera...

Hi Dan, the camera is connected directly to the POE port on the NVR.

Hi, to replace a DS-2CD2632F-I camera for a DS-7608NI-SE/P nvr I bought a DS-2CD1643G2-IZ camera. I activated the camera using SADP software and I connected it to the nvr but it does not work: in the cameras list I see the error "La rete non è raggiungibile" that is more or less "Network not...