Recent content by rosswill

So the cameras and NVR have been online since the firmware update on 27th August and all was well until this week. I noticed all cameras were offline again on the app. Logging into the NVR over the same wifi network and doing a soft reset of just the NVR has brought all cameras back online again...

So far it has yes, so I would definitely recommend upgrading the firmware as described above. Nothing has been changed hardware wise in any way with the cameras still on same cables etc.

Thank you I have updated firmware this evening and will see if this helps

NVR V4.61.025 build 220905 DS-2CD2086G2-IU V5.7.3 build 220112 DS-2CD2086G2-I V5.5.801 build 211105 DS-2CD2086G2-I V5.5.801 build 211105 DS-2CD2086G2-I V5.5.801 build 211105 DS-2CD2086G2-I V5.5.801 build 211105 DS-2CD2086G2-IU V5.7.3 build 220112 DS-2CD2183G2-IU V5.7.3 build 220112 Regards Ross

Hello it’s the latest firmware I’m away from the device currently but when I checked last night it was the most recent

Hello I have a DS-7608NI-I2 / 8P with 7 cameras connected directly to it. Everything runs and does what I expect for around 2 weeks when I notice I can no longer log in with the Hikvision app - cameras offline message is displayed. If I log in from the local network I can see from the logs that...

Hello I have started experiencing issues with all 7 cameras going off line after around a week. The fix for I have found for this has been to log into my NVR and perform a reboot remotely after which all cameras are back working again. Any idea what may be causing this? A failing NVR perhaps? As...

Thank you so much

Following some changes at home I'm looking to move the IP cameras I have from a switch where they are currently connected over the network to my NVR to be directly connected to the rear of the NVR. I thought it may be as simple as plugging into the POE ports but there is clearly more to it than...

Thanks @Dan for taking the time to explore this. Maybe this can be a feature request for future updates?

Owning the same AcuSense cameras I can confirm I also see what @mozso is reporting. Line Crossing does trigger alarms in the Hik-Connect application, whereas Region Entrance does not, even though Region entrance email notifications are received from the cameras successfully.

Thank you @Dan, so am I correct in assuming if there is no notification centre as such, that for a camera configured (non-NVR configured) notification to be received anywhere, this camera needs to be have platform access Hik-Connect enabled and registered in order for the app or any other device...

Would someone be kind enough to explain a little more about how the Surveillance Centre and notifications work? For clarity, I'm not asking how to configure them, more how they function. For example, when an IP cam or an NVR is configured under smart events to "notify surveillance centre" where...

I have seen reports of others managing to install the iVMS s/w onto Android-based Smart TV's. Mine although smart are quite old now, and I was against having to load up the smart hub that can be a slow process, and wait for the app to launch. At least with my setup I can quickly channel hop...

I realise this does not directly answer your question, I'm sure someone more knowledgable will do this soon, however I am successfully sending my NVR feed over my home network to multiple TV's using a single HDMI-over-ethernet transmitter and multiple receivers. These are the ones I'm using in...