Recent content by old codger

would having two mobile telephone mast (one handling local hospital 999 calls} also on site be a problem?

Thank you, I am pricing these out. Did wander if would need a new wtreless camera and reciever?

We have an Hikvision DVR8 working with 6 cameras coax connected, we would now like to move one camera to a new location which is difficult to wire. The new site has an approx 35m straight aerial view of the old site, see attached with “B” being the new site. Can we mix wireless with wired and...

Our router came with a TV package, so it would mean going our own way with that. I like the idear though, but at almost 93 it is anything for a quitert life I'm afraid.

Sorry, I was not doing what I tell oters to do. Close the app then reopen to let it pickup your editing. We both can now get on with our lives, thank you for your help. ron

Have been thinking of trying 8000, have changed my phone but still looking where to do the DVR?

The IP address has not been altered, only thr server address. Looking through the DVR settings, should PPPOE be anabled? cannot remember ever having to do this in the past. When the iVMS-4500 app on the phones gets into the DVR, it can select playback but not see it.

Have tried to alter the port forwarding rule to 80/80, but the hub reverts that setting to port 8080 which now does not let the app past. The old hub settings have allowed iVSM-4500 to view the screens and videos for the last three years. It is the DVR settings that we reset, and got us into...

No, the 8433 port is not shown.

Videos time out on all the phones. Ron

The mobil phones can sign into our DVR with the iVMS-44500 app and see the screens at the moment, so it is not a hub problem. It has got to be in our DVR setting, as those are the ones we reset and cause this problem.

All 4 port number are forwarded in my hubs firewall.

Those are the ports shown on my DVR nat seetings, all but port 443 show clear on NO-IP port checker

Attahments deleted From remote phone can sign on, then get message "no plug-in detected" Port settings all done in the firewall of the hub

Going back over this string of conversations i find none with attachments to delete, only an advertisment which I can do nuthing with? Port 8000 has a forewarding rule in the hub, and the NO-IP tool shows it to be clear?