Recent content by Nomad

Thanks, that sounds promising. Can I change the resolution from the indoor KH6320 unit, or I must login into the camera directly?

It seems the KV6113 was installed a bit low, with the camera at 1.4 meters from the ground. I'm considering relocating it to 1.6 meters. Do you think that height might be too high? What is the typical installation height for these doorbells? Unfortunately, moving it will require cutting out and...

Hello everyone, I'm using a DS-7608NI-M2/8P along with a DS-2CD2387G2H-LIU for my driveway. When I enter the intrusion detection zone, the camera's LED spotlight turns on. I also have lights in the driveway controlled by a SONOFF MINI R4M, which is a Wi-Fi Matter device. Is there a way (perhaps...

Thanks. I will try to arrange wifi coverage for that area or connect the POE switch to the internal LAN. The image for nightvision has cleared up (dont ask - I didnt remove the protective film). So all is clear now.

Hi, yes, thank you. That’s how it would work... unfortunately, there’s no Wi-Fi coverage where the outdoor KV6113 unit is located.

Sorry for any confusion. The doorbell is connected to a PoE switch, but the PoE switch isn't connected to any network since I can't run a cable to it. Additionally, the indoor station (KH6320WTE1) is connected to both the PoE switch and Wi-Fi, allowing me to view the KV6113 through the...

Hello everyone, I have a setup with a KV6113-WPE1(C) and a KH6320WTE1 indoor station, both connected and powered via a PoE switch. What I recently discovered is that the indoor KH6320WTE1 also supports Wi-Fi, which I successfully connected, allowing me to add the KV6113 to Hik-Connect by...

Good day, perhaps someone has done something like this? just as a bump.

Hello Gentlemen, I would like to purchase the "Hikvision DS-KV6113-WPE1(C) Door Station" for my gate. My question is: if I connect it with an electric strike which has the (locked-unlocked) monitoring contact, do I need to connect the monitoring contacts to the AIN1 input as per the wiring...

I got it, thanks for the clarification Dan!

Hi Dan, The ColorVu DS-2CD2387G2H-LIU isnt an AcuSense camera as far as I see, whilst the DS-2CD2386G2-IU are. I'm planning to use the ColorVu DS-2CD2387G2H-LIU for my driveway with the line crossing function, there will be 4 cameras and 1 doorbell (hikvision wifi) connected to the NVR.

I did some review, and DS-7608NXI-K2/8P with POE looks to be the superceeding model, as per the HIKVISION website. Is this an acceptable unit? On another note, my network connection is going through a 4G router, the connection does not have any open ports, will the hik connect app work in this...

Thanks!

Hello Dan, I'm just reviewing a similar setup for my house with utilizing DS-2CD2386G2-IU & DS-2CD2387G2H-LIU. Which NVR would you recommend, I would like to use AcuSense for the DS-2CD2387G2H-LIU as it will be facing the gate.