Recent content by mtv

Hi Q1984, I'm sorry but i only have a doorbell which had similar effects on not showing notifications and pictures, but that has been solved with the settings mentioned. I can't help you with the outdoor station, as i don't have this.

See also the notifications received

Please check when the doorbell is added to app, at notifications in the app. It needs to say, enable. Enter the setting and check if it is enabled and that it states receive and push event. Also check in the same screen if certain notifications are not blocked. I had this earlier and then...

in addition to previous, the above situation works for the chime only, when connected to the blue and green cables on the DS-KV6113 (after selecting the mechanial chime in the menu). I was able to pull an extra cable for POE powering, so this is working as expected.

Sorry for adding a question here. Bought the ds-kv6113-wpe1(c) to replace my ezviz db1 in which at first the normal doorbell was connected. This situation works as pressing the db1 doorbell,the mechanicaL chime will ring. I would like to replace the db1 with the ds-kv6113-wpe and power with...

Never mind, misread the earlier notification, i now see that this version was part of the vulnerability announcements

Hi dan, Do you have an idea what is the difference with nvr-k74-bl-ml-std-v4.30.096-221220 for the ds7604ni-k1/4p (b)?

Hi @Phil thanks for your "warning" to wait for a while. I'll keep an eye on the topic you shared. You're welcome, that is why i shared it. Well that is indeed a good plan to share it with others. My Synology is working fine via the USB connector and the SNMP method doesn't work on my NVR...

Hi @Dan thanks for your prompt reply. Not yet decided to add more cams. It was more the plan to get the option to have newer options and to get better support against power fail. So I'll look at your proposed model.

Hi I have a NVR DS7604NI-K1/4P(B), a HD is installed. Latest firmware V4.30.096 and i doubt there will be any newer introduced for this one. I have 3 cams, DS-2CD2047G2-LU (2 * G3, 1* G5) Is it worth upgrading to a DS7608NXI-I2/8P/S (E) or DS7608NI-M2/8P? i know Hikvision is rapidly changing...

Hi, in the previous versions of hik-connect, a channel that is not being used (i have nvr DS-7604NI-K1-4P with 3 camera's) was not visible. On the nvr only the first 3 are set active. With the new app, every time he tries to resolve camera4@F....... on the NVR. The option to hide a camera in...

I’ve installed latest version. v4.30.096 issue i’ve found so far is delay in getting new view in hikconnect app, it comes with instable network remark after counting up to 100% waiting, and then it pops up. With version v4.30.085 that wasn’t the case. but i can live with it.

Hi @Dan Thank you for confirming that the button is not working at all, confirms my thoughts. I'll update then via the manual methods.

I’ve this nvr, currently installed with v4.30.085. I’m located in the Netherlands. when i check on nvr, it mentioned no update available. but on uk portal there are 2 updates newer, on eu portal there are no newer versions...

Thanks a lot, time to upgrade for me!