Recent content by kizzy9c

Which VMS software is the best to run a HIKVISION IP CAMERAS AND NVR'S both remotely and on the same network without internet , just as Milesight Pro used to?

okay, I'll do just that. Thank you very much @Dan i really appreciate you.

And this can do all the things VMS Pro did? How about VMS Enterprise?

Hello there, did Milesight discontinue VMS pro software or did an upgrade, I'm planning on using VMS pro for an upcoming project so was going to download it to see how it functions and all but I couldn't find it. I saw VMS Enterprise, I don't really know how to go about it. Please someone...

I did the crimping myself, could the crimping be causing it?

I did tue cabling, I used D-link cables I don't know if you know that product. Bit it was recently I was updated that D-link cat6 is not 100% copper, could that be a problem?

Not really no planning was done on that note, I thought the higher the frame rate the better.

Thank you David , I'll have that in mind. I disabled the Plug and Play functions and added manually but still get the same report. I had to try another method by plugging some of the cameras into the 16 PoE ports of one of the NVR's and those ones came up then I added the other ones manually...

The first picture shows the cams being online, The second one shows the other cams that is added to the other NVR with a caution ⚠️ sign, the third one, is how it turns out after I add them to the second NVR, some show THE NETWORK IS UNREACHABLE, while some show FAILED TO GET CHANNEL PARAMETERS...

No, I didn't connect a router to it, but now I've been able to access the cameras on my laptop with the SADP tool and manually assigned IPs to all the cameras with their gateway. The issue I'm having now is, one of the NVR's are showing all 32 cameras very well, but the other NVR shows online...

I'm currently working on a project, I installed over 60 Hikvision ip cameras using two 32 channels NVRs (DHCP turn ON on both NVRs), I used PoE switches to power the cameras and just using LAN cables to connect the NVRs to the switch. But I'm having a hard time, some of the IPs of the cams are...