Recent content by ketapang

update i found the problem rodent damage to the cable from Poe switch to the NVR (lesson learned cable in conduit now)

System 1x Hikvision NVRmodel DS-7616NI-Q1 2 x Hikvision 10 port Poe switch Model DS-3E0310P -E/M 6 x Hik poe cctv Hikvision android Ap V6.8.400.0326 System was working fine, now when I use Hikvision it says the NVR & all cameras are offline, intermittently the NVR is online but never the...

As it happens i needed 1 of each for different locations and you are correct about the model numbers thanks for the check

Hi could catch on the poe i have checked on the EZVIZ web site it does say its Poe....

Would a H8c POE 2K camera be compatible with a Hikvision NVR model number DS-7616NI-Q1 I believe it should be

Thanks for your time and answer appreciate it

NVR = DS-7616NI-Q! 8 port switch is dumb 10 port POE switches both Hik vision DS-3E0310P Dont need VLAN the cctv network have put on their own network at the gateway

I have inherited a hikvision cctv with 2 x 10 port Hikvision poe switches and 1 x dumb 8 port switch i think they are connected as per the diagram below is this the best way to hook them together or why cant i just connect the nvr to a spare port on one of the HK vision switches

Thanks for the heads up will buy another brand then

This one says its stand alone and can use with hik-connect ap

Hi update on my initial post I checked the wall and it is possible for me to get power to a camera. So what i am looking for is a wifi outdoor camera that i can pan and tilt from the hikconnect ap is there such a camera? im looking online (im in Indonesia) on tokopedia amazon equivalent

Does Hikvision make solar powered outdoor cctv that you can manage via hik ap?

thanks for that really appreciate this Just to clarify 1 question am i correct in saying you cannot change any of the NVR settings with this ap regardless of user level of access? All editing of the nvr settings needs to be done directly at the NVR (monitor & mouse) or via web interface on the...

ok thanks will take a look at the manual first before posting more

I have set up new NVR and am setting up the hik connect app. I need to be able to allow other users to view the cameras etc via the Hik Connect app but I don't want them being able to change any of the network settings in the NVR. So, if I give them the user name and password I have set on my...