Recent content by jpcolin

JB, OMG I'm ashamed, I wired the wrong wires for input1, so arming-disarming works now! But I still have that not enough resource message, strange, I did all you said. clear areas, disable everything. At the moment I only have motion detection as event. Strange. Hikvision I great hardware at...

Goodmorning, So I took the time to totally reset the camera and then reset the NVR (exept IP and user parameter). I did not touch any setting on in the camera interface. And still I get this message (not enough resource...) And yes Enable AI by devices untiked What should I enable in this...

Hi, I have the LSU/SL in residential environment (back yard) and I love it! You can set not only siren but also warnings, on intrusion and/or movement with AcuSense it's really accurate so almost no false alarms! The flashlight is great to have the attention of intruders at night! I would...

JB, Thanks you, busy day yesterday, I did not have time to look into that. I will try to do this today or tomorrow, What I'm planning to do, Clear the NVR engine of the NVR like you said, and factory reset the camera. Can I configure the "new" camera directly within the NVR then? No via SADP...

Ohhh ok, I thought "Use device AI" was meant for camera AI (device=camera imo) like I said interface are quite confusing. I first bought the camera to test AcuSense and ColorVu, I really like it so recently I bought the NVR, so yes, camera was already configured. and the I adde the NVR. So not...

Hi, Got up this morning full of hope ;-) but still no go. I tried what you said. But maybe the first link is to understand the basis for me: - Difference between Basis Event and Smart Event. I seems Intrusion detection does not work so good, I have more success with motion detection. Any...

From all the video and docs I have read, it seems it needs a specific firmware. I only have the bell in His-connect and that is used to mute the notification, strobe and alarm message are still active. Arming with input 1 does not work either. I don't have any arm/disarm button on the app. NVR...

I did the test and it does not work!

From the video's I saw, and the tests I did, I don't have a real live guard functionality. What I want to do I arm the strobe, the sound notification and the push notifications when I'm away from home. and disarm when I'm home. At the moment it is nog possible in the the iOs app. Furthermore in...

Hello, I just installed my NVR 7616NXI-I2 (c), at the moment I only have 1 IP Cam 2cd2387G2-LSU/SL. I was looking to enable Live Guard but it seems it needs a specific firmware. Is that right? I only found an old firmware from 2021 DZ_K51_ML_STD_V4.40.010_210319.zip Is this the latest and is...

JB, I shearched foro an M model, but can't seem to find it here. Found some good deal on NXI-I model, i have to ask if it is a (c) model. From what i understand NXI-K is even less powerfull than the I. if i can't find a M i better take a I right? What is your meaning, if i get liveview on 4x...

JB, How old is the NXI range? How many 8MP camera did you have on it and was is a 8ch or 16ch? M serie seems hard to find here. how is the 16ch NI-M pricewise to the 16ch NXI-I? I wanted acusense on the MVR to use face recognition on the doorbel not for human detection. Thank you for the nice...

JB, Yes I knew that, but it seems logic to met that is the NI-i replaced by the NI-M, that the NXI-i will be replaced by a possible NXI-M. Strange Hikvision don't give any information about the used processors in the NVR's. Are you are of problems with the NXI-I and multiple 8Mp cameras? I just...

Oh yes i see it now. NI is without accusense en NXI is with accusense. But i also read that i series is discontinued! So i assume it will be replace by a NXI-M model with acusense? Any info on this?

Thanks for this detailed info JB! I just have to find a good deal for a DS-7616NXI-I2 then ;-) Last 2 questions - what is the difference between the NI and the NXI range? not clear to me. - Is decoding of streams at time enough in your experience? And if i need help for Live-Guard you seem to...