Recent content by John54

Hi JB1970 I am working on a solution for this problem. Do you know what the voltage of triggerpulse is that's generated by the DS-KV6113-WPE1(C). I assume its a short DC of 5 or 12V. I am correct do you think?

Thx

Ok, its a wired doorbell and to that doorbell is connected a wireless Friedland extension

Ok so with 4.30.097_240401 I have the correct firmware version for my recorder. By the way the recorder is working fine.

Thx JB1970. I have a dingdong with 230/8V transformer and a wireless Friedland connect to that. So I guess as you say it want work. I will look to your solution and other possibilities. If I find a workable one I report it back on the forum.

I want to buy a Hikvision DS-KV6113-WPE1(C) doorbell. I will connect the DS-KV6113-WPE1(C) directly to my network with an UTP connection. But I want to connect one way or another my old dingdong doorbell also to it. So when I am at home the dingdong also goes as there is someone at the door. Is...

I just read this thread and I'm a bit confused. A few weeks ago I updated my DS-7604NI-K1/4P hardware version B-R-K9B2-00 to firmware version V4.75.206, Build 240119. If firmware version 4.30.097_240401 is the correct version, I think I need to do some kind of downgrade. Any suggestions?

Ok thx again. Now I can configure the system much easier and add other cameras. Thx to all who have helped or tought how to help me. It is very much appreciated and maybe I can help some of you in the future.

Thx very much. It works. Do you think I should do an update of the NVR firmeware? Recently there was a post from Kyle if I am correctly remember to not do an update of the newly published firmware for certain NVR's.

At last I just did a reset to factory defaults and now I am a able to login to the NVR. The only thing is that the cameras dont let see a image. I have to do something with an encryption key, see attachment. Furthermore I ask myself whether I would or would not do an update to the latest...

@mtv your question about the netrwork speed made me look at the specs of the NVR and what I see is this: 'Network ProtocolTCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS'. So it looks like the HTTP protocol isn't an option. Or am I wrong?

I think your right. In a post earlier I mentioned '©2022 Hikvision Digital Technology Co., Ltd. All Rights Reserved.' as what I saw. So it looks like it is up to date. With the cameras it is 2021.

Just tried with the ipad. The cameras are accessable. The loggin screen of the NVR doesn't come. By the way on the pc's it it also takes some time for the logginscreen of the NVR to present itself. For the cameras it is their in a instance.

I just did a try with chrome and a log of the network traffic from the browser. I see this. So a script stalls the browser. When I try that it falls back to the loggin page with the &page=config and stalls

The cams are connected to a switch with poe. I tried IE, Chrome, Edge and Chrome with the IE tab. I appreciate it that you are trying to help, thx. What is strange to me is that I get a loggin screen as reply from the NVR by using a webbrowser. After entering usn/pw I get...