Recent content by jim gourlay

Thank you so much.The issue was exactly as you said, reflection from the wall.This forum is worth its weight in gold, thanks again

Yes but it won’t even switch on manually ?I can turn my other two colorvue on when I like if I feel light is low.I can’t do that with this one.Am i correct in saying I should be able to bring it on manually ?

Really confused.I removed my dark fighter accusense 8mp DS- 2CD2386G2-ISU/SL camera and replaced with the two way audio colorvue accusense 8mp DS-2CD2387G2_LSU/SL .The default setting gave a black and white almost pure dark image to my surprise? I have to turn off the smart supplement light and...

Hi When out and about with iPhone over 3,4 or 5 g whatever. I can access live feed over my back of house camera quickly and easily, the other two same camera models never load and the usual network unstable message after trying to load always comes up.Any ideas as to the reason.I am trying to...

Just a wee update on the oxfffffff error issue in display , and to thank you chaps for the firmware advice.After updating all the firmware on nvr and cameras the error was still there, however! , despite the camera restore function not solving the issue before it has now after these firmware...

IE is finished in June

Using edge but in internet explorer mode.The. Error came up on the NVR before I even started using the browser

Pain because I can’t alter brightness or up the IR light etc as I have a very dark driveway

The error code is still there.Tried to see if laptop would let me change there, but comes up with parameter error.No setting works just get the error code when try to ‘Apply’

We update, I’ve updated all the camera firmware, carefully and nervously all working fine.Not tried the display setting error code in nvr yet as dearest is in bed lol … I guess if this fails it’s a hard reset ???

The other

Thanks a million lads firmware upgrades went through fine.I have Event Perimter now and OTHER events which I don’t know what that is??…. I still have the display error code issue on those two cameras though .Do I perhaps need firmware upgrades for the camera themselves?.One is colorvue the...

Really appreciate guys.Do I download these, restart then download the next.Do I interact with the nvr in between ?

It’s only showing me the latest as per pic

There you go - Firmware Ver. - v4.32.110 build211009 I might add that this only happened after constantly playing around with the display settings such as brightness, contrast, IR light, wide dynamic range etc etc