Recent content by horze

Hi All, ive recently installed DS-KV8113-WME1 villa 1 button doorbell and a DS-KH9510-WTE indoor monitor I have successfully linked the 2 together and there are no issues with bell ring function to indoor station successfully added nvr camera to indoor monitor to view via substream successfully...

id love to know this aswell, please let me know if you find a way

So im still on 4.22. I worked out that live view via VRMS doesnt work with 4.22, but it workes fine when going to the NVR via ip address on IE. Cameras also showing up on doorbell now.. I had to untick the security option for hik connect live via monitor of NVR as it doesnt show up on IE or...

hi guys, an update with this i spent all day yesterday on this. I was on teamviewer with hikvision technical support, and we went through a number of things, even restore to default settings. Nothing worked, the technicain gave up and said he will look deeper into this. I continued on it trying...

Thanks again for your time guys, still no luck im afraid. ive attached updated photos thanks again

Thanks very much for your help With the dns server settings.. set those settings on the NVR or on the Router settings? I see it chose port 80 automatically Does it need the other ports aswell "80, 554, 443, 8000" Thankyou

To be honost, i didnt touch any of the settings on the router for the NVR, all i did was give the NVR a reserved ip address.... ive got some photos here. I also noticed on the router settings.. none of the dns settings are set, do they need to be set aswell? Let me know if there is anything...

sorry, it frustrated me so much i forgot to put it in my original post The NVR is a DS-7608NI-I2/8P Firmware is 4.22.000 Build 200418 Had firmware 4.1.64 Build 190726 before that and same issue Also to note i am in Australia, in case that changes server address's etc Thankyou

just tried that, no good ive tried litedev.us.hik-connect.com litedev.hik-connect.com and also dev.hik-connect.com

thanks for your reply, i will try that Should i be able to ping that address through cmd?

Hi guys, new the forum, hope every1 is well Ive pretty much givin up on getting my NVR on hikconnect Ive gone through the pinned thread: All seems correct Ive tried everything Ive pinged the server dev-hik-connect.com Worked fine I used telnet, it displayed the blank screen as it should I just...