Recent content by camman1

Done it finally. Removed ring Loosened lock screw Had to forceably move the camera around cleaning up around the ball and using lubricant(GT85) to free it. Much better now Many thanks

Help, The camera is DS-2CD2342WD-I Looking at how I have the turret orientated is there any reason you can see why I cant tilt it upwards any more, am I at its limit of adjustment? Should i get it down and twist it back into its normal orientation. I think currently it's twisted 90 degrees. I...

Many thanks, makes sense, ill go up and move it cheers.

Any advice what's best to do to get the shed illuminated/visible at night. Many thanks. Camera orientation Daytime image Nightime

i can connect to the nvr externally using any app... hik connect, ivms etc ....using that static wan ip.....yes i have those ports forwarded the wan ip hasnt changed in 2 or more years...(i can use hiks ddns service if i need to but not necessary)

I have cable internet with Virgin media. Virgin media issue me a "superhub2" although I could also set up a "superhub3". Both these are a modem/router combination unit with very little scope for networking beyond port forwarding. Virging media issue a "static" ip address for internet access.(not...

Thanks for the help just a couple of questions... 1.you need to disconnect and change ip of your NVR standalone network interface to another range like 192.168.2.99 So my router wont see the NVR network interface, but you are saying to connect the router to the POE interface instead. Is that...

thanks....PFSense is software right? i used to use an old buffalo router flashed with dd-wrt but its too old now. which router are you using, thanks

thanks stuart, makes sense. My virginmedia superhub2 or 3 has no such settings. So Im gonna have to look at adding a proper router. thanks again

thanks...i shall test this out connecting laptop to poe interface. quote.. "but because your camera connect to NVR first then router so they have ip range of 192.168.254.X and should NAT to 192.168.1.99 first and then goes to your router, however i think NVR do this by default" im not sure the...

equipment DS-2CD2342WD-I firm V5.5.53 build 180730 DS-2CD2385G1-I V5.5.83 build 190221 DS-7604NI-E1 / 4P V3.4.103 build 181226 I have managed to set up email alerts sent from the NVR to a gmail address. However the images are only attached to maybe one every 20 emails and the image size of...

All good...updated direct to latest firmware from the nvr usb slot. Thanks

serial number.....what region is RR...is that suspect ? DS-7604NI-E1 / 4P0420151207AARR559439678WCVU

i tried to upgrade the firmware with the file linked by Phil...which Im sure is the correct one. V3.4.101 build181024 Upgraded via wifi and Explorer browser. It all looked ok. And went through the upgrade showing the progress bar, then a reboot. However the system settings still show the old...

Sorry to ask again...can someone just confirm the correct firmware to flash for my NVR...is such a confusing list of NVR's on the hikvision website and I dont wanna brick it with a wrong firmware upload.....thanks Current nvr and firmware. DS-7604NI-E1 / 4P firm V3.4.0 build 151103