Recent content by cameraciguzeli

Hello all. I have learned much from topics here. I have registered now i hope i can help some others and also get help. Here is my situation: Big building 1x 64ch nvr 8864ni-i4 8X 4ch nvr 4x 8ch nvr 3x 16ch nvr All cameras are connected to poe switch and added to the 64ch nvr. The 4-8 and...

I have a DS-7608NI-K2/8P NVR, it supports independent HDMI and VGA view. So I can separate the cameras. However, I have another NVR 16ch 7616nxi-k2 , data sheet says independent, but u cannot (I have the latest firmware). So, the information displayed on Hikvision website is incorrect.

Same here. After couple of days i receive this warning, after a reboot it works. Is there a solution ? There is no low bitrate mode available for my fW

Yes, Upgrade the system to the latest firmware it should be fixed then

:)) yeah, after all that lag and disconnects, it could be your hallucinating :) I did upgrade to latest firmware today, and the problems seem solved Thanks for starting this thread. i hope it will help others.

I had the same experience with the 7716NI-M2/16P model today. camera 1 to 6 all 8MP models, very laggy, even the substream, connection loss etc. The cable distance was like 60-70m for all, so i thought mayne thats the issue. My firmware isV4.61.400 build 220728 I could not wait to reply on this...

I have the same issue in a configuration with multiple NVR. Some camera's are added to multiple nvr, those are changing the substream settings to around 4000Bitrate, which results in not opening. I have to login to camera, and lower the bitrate for substream to around 320 then reboot in order...

Hi, could i please ask yo usomething. Dunno if ur reading this or not